Epson EM07ZS1647F User Manual page 112

4. Troubleshooting (DeviceNet)
4.1.3.2 Loose Connector and Signal Wire
Check for the connections of the following parts on the connector and cable.
(1) Crimp Terminal
(2) Connection of connector and signal wire
(3) Connection of connector and unit (T-branch tap)
100
Small flat-blade screwdriver with even thickness
Connector on the node
(mask) side
Screw
Cable side
Female
Male
Thin cable
Female
Cable with M12
micro-size shielded
connector (at one
end or both ends)
Crimping Terminal
Connector on the
T-branch side
Screw
Mounting
hole
Male Female
Male
Connector on
the cable side
Thin cable
Cable with M12
micro-size shielded
connector (at one
end or both ends)
Fieldbus I/O Rev.6