Redundant Hot-Plug Power Supply Option - HP ProLiant DL388 User Manual

Connect the power and data cable to the optical drive.
7.
Install the access panel (on page 26).
8.
Power up the server (on page 24).
9.

Redundant hot-plug power supply option

CAUTION:
all bays are populated with either a component or a blank.
Access the product rear panel (on page 26).
1.
Remove the power supply blank.
2.
WARNING:
power supply blank to cool before touching it.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the power supply or
Hardware options installation 59