Remove The Access Panel - HP ProLiant DL388 User Manual

After performing the installation or maintenance procedure, slide the server back into the rack, and then
3.
press the server firmly into the rack to secure it in place.
WARNING:
latches and sliding the server into the rack. The sliding rails could pinch your fingers.

Remove the access panel

WARNING:
internal system components to cool before touching them.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To remove the component:
To reduce the risk of personal injury, be careful when pressing the server rail-release
To reduce the risk of personal injury from hot surfaces, allow the drives and the
For proper cooling do not operate the server without the access panel, baffles,
Operations 25