Mirrored Memory Population Guidelines - HP ProLiant DL388 User Manual

Multi-processor Online Spare population order
For Online Spare mode configurations with a multiple processors, populate the DIMM slots for each
processor in the following order:
•
RDIMM
First: A, B, and C
o
Next: D, E, and F
o
Last: G, H, and I
o
•
UDIMM
First: A, B, and C
o
Last: D, E, and F
o
Do not populate slots G, H, and I.
o
After installing the DIMMs, use RBSU to configure the system for online spare memory support
online spare memory" on page 74).

Mirrored Memory population guidelines

For Mirrored Memory mode configurations, observe the following guidelines:
•
Observe the general DIMM slot population guidelines (on page 49).
•
Always install DIMMs in channels 1 and 2 for each installed processor.
•
Do not install DIMMs in channel 3 for any processor.
•
DIMMs installed on channel 1 and channel 2 of an installed processor must be identical.
•
In multi-processor configurations, each processor must have a valid Mirrored Memory configuration.
•
In multi-processor configurations, each processor may have a different valid Mirrored Memory
configuration.
Single-processor Mirrored Memory population order
For Mirrored Memory mode configurations with a single processor, populate the DIMM slots in the following
order:
•
RDIMM
First: A and B
o
Next: D and E
o
Last: G and H
o
Do not populate slots C, F, or I.
o
•
UDIMM
First: A and B
o
Last: D and E
o
Do not populate slots C, F, G, H, or I.
o
After installing the DIMMs, use RBSU to configure the system for Mirrored Memory support
mirrored memory" on page 74).
("Configuring
("Configuring
Hardware options installation 52