Attach the capacitor pack to the air baffle.
10.
Install the PCI riser cage (on page 29).
11.
Install the full-length expansion board retainer (on page 30) if any full-length expansion boards are
12.
installed.
Install the access panel (on page 26).
13.
Install the server into the rack
14.
Power up the server (on page 24).
15.
Optical drive option
Power down the server (on page 24).
1.
Extend the server from the rack (on page 24).
2.
Remove the access panel (on page 25).
3.
("Installing the server into the
rack" on page 35).
Hardware options installation 57