Install the PCI riser cage.
4.
Install the access panel (on page 26).
5.
Install the server into the rack
6.
Power up the server (on page 24).
7.
Install the full-length expansion board retainer
Power down the server (on page 24).
1.
Extend the server from the rack (on page 24).
2.
Remove the access panel (on page 25).
3.
Install the PCI riser cage (on page 29).
4.
Install the full-length expansion board retainer.
5.
Install the access panel (on page 26).
6.
("Installing the server into the
rack" on page 35).
Operations 30