Table of Contents
Advertisement
7
When the system drawer starts successfully, install the operating system,
if necessary.
8
Turn on the other system drawers by repeating Steps 3 through 7 for each
additional system drawer installed.
After this procedure, the system drawer can be turned on using normal start
sequences.
To turn on the system drawer using normal start sequences:
1
Turn on devices and drawers attached to the system drawer first.
2
When the devices and drawers attached to the system drawer are running,
turn on the system drawer.
Turning off the system drawer
To turn off the system drawer:
1
Close all programs.
2
If necessary, issue a "flush" command to write the contents of any caches
or buffers to disk.
3
If necessary, issue a command to exit or quit the operating system.
4
Press the ON/OFF switch on the system drawer.
5
Turn off any other devices and drawers connected to the system drawer.
Turning off the system drawer
27
Advertisement
Table of Contents
