Table of Contents
Advertisement
Installing a cable retractor in a non-Gateway
cabinet
To install a cable retractor in a non-Gateway cabinet:
1
Remove the adapter bracket from the cable retractor straight bracket.
2
Position the cable retractor straight bracket on the back vertical mounting
rail, then align the mounting holes on both the cable retractor bracket
and the back vertical mounting rail.
3
Attach the bracket to the back vertical mounting rail using a bar nut and
screws from the accessory kit. The retractor may be mounted above or
below the level of the system drawer.
20
Installation
Adapter bracket
Straight bracket
Back vertical
mounting rail
Bar nut
Straight bracket
Cable retractor
Advertisement
Table of Contents
