Table of Contents
Advertisement
2
Attach the back end of the cabinet mounting rail to the back mounting
bracket using two screws, hex nuts, and star washers from the accessory
kit.
One screw must be located in the last back bracket screw hole. The second
screw can be located in any of the other back bracket long screw holes.
3
Align the front of the cabinet mounting rail to the front mounting
bracket by sliding the inner rail and inner slide until the rail screw hole
opening lines up with the first inner rail screw hole and with the second
screw hole on the front mounting bracket.
Inner rail
Inner slide
4
Attach the front of the cabinet mounting rail to the front mounting
bracket using a screw from the accessory kit.
5
Slide the inner rail and the inner slide again until the rail screw hole
opening lines up with the front mounting bracket long screw hole.
6
Attach the front of the cabinet mounting rail to the front mounting
bracket using a screw from the accessory kit.
7
Mount the second cabinet mounting rail on the opposite side of the
cabinet by repeating Steps 1 through 6.
Installing the cabinet mounting brackets and mounting rails
Cabinet mounting rail
Spring latch
15
Advertisement
Table of Contents
