Cr_Srcinp3 Command; Cr_Srcinp4 Command; Cr_System Command - Sanyo PLC-XL51 - 2700 Lumens Manual

PLC-XL51 Expand Serial Command Functional Specifications
9.7.5

CR_SRCINP3 Command

Command "CR_SRCINP3" [CR]
Details Get selected source of Input 3_Video
Acceptable
Response Request data
Unacceptable
9.7.6

CR_SRCINP4 Command

Command "CR_SRCINP4" [CR]
Details Get selected source of Input 4_Network
Acceptable
Response Request data
Unacceptable
9.7.7

CR_SYSTEM Command

Command "CR_SYSTEM"[CR]
Details Get selected System
Acceptable
Response
%1
"000_%1"[CR]
"AUTO" -------------- Video Auto is selected
"VIDEO" ------------- Composite Video Input is selected
"Sÿ VIDEO" -------- S-Video Input is selected
"YPBPR" ------------ Component is selected
"?"[CR]
"000_%1"[CR]
"WIRED" -------------- Wired is selected
"WIRELESS" -------- Wireless is selected
"?"[CR]
"000_%1"[CR]
"VGA1" -------------- VGA1 is selected
"VGA2" -------------- VGA2 is selected
ÿ
"XGA1"-------------- XGA1 is selected
ÿ
"WXGA3" --------- WXGA3 is selected
"1080i" ------------ 1080i is selected
"1035i" ------------ 1035i is selected
Input is
"720p" ------------- 720p is selected
PC Analog
"575p" ------------- 575p is selected
"480p" ------------- 480p is selected
"575i" -------------- 575i is selected
"480i" -------------- 480i is selected
"MODE1" ------- Mode1 is selected
ÿ
"MODE5" -------------- Mode5 is selected
When there is no signal, projector returns error code"101"
[CR]
"AUTO" ----------- Auto is selected
"1080i" ------------1080i is selected
"1035i" ------------ 1035i is selected
"720p" ------------- 720p is selected
Input is
"575p" ------------- 575p is selected
Y,Pb/Cb,Pr
"480p" ------------- 480p is selected
/Cr
"575i" -------------- 575i is selected
"480i" -------------- 480i is selected
Projector returns selected System status regardless of the
signal input.
47/63