PLC-XL51 Expand Serial Command Functional Specifications
8.9 Sound Command
8.9.1
CF_VOLUME Command
Command
"CF_VOLUME_%1"[CR]
"000-063" -------------------------- Directly select Volume setting value
%1
"UP" --------------------------------- Current Volume setting value +1
"DN" --------------------------------- Current Volume setting value -1
Control Volume value
The same operation of Volume Up/Down as projector and RC, and directly select
Volume setting value. When setting Volume value, the Sound Mute ON status is
Details
canceled just like RC operation. The value set by this command is stored in
Projector.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.9.2
CF_MUTE Command
Command
"CF_MUTE_%1"[CR]
"ON" ----------------------------- Set Sound Mute to ON
%1
"OFF" --------------------------- Set Sound Mute to OFF
Control Sound Mute ON/OFF
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
28/63