Cr_Lampmsts Command; Cr_Projh Command; Cr_Hmlamp Command - Sanyo PLC-XL51 - 2700 Lumens Manual

PLC-XL51 Expand Serial Command Functional Specifications
9.9.5

CR_LAMPMSTS Command

Command "CR_LAMPSTS"[CR]
Details Get Lighting status of lamp
Acceptable
Response %1
Unacceptable
9.9.6

CR_PROJH Command

Command "CR_PROJH"[CR]
Details Get total running time of Projector by hour (h)
Acceptable
Response %1
Unacceptable
9.9.7

CR_HMLAMP Command

Command "CR_HMLAMP"[CR]
Details Get lamp number.
Acceptable
Response %1
Unacceptable
"000_%1"[CR]
"ÿ N **** " A number of * should be among 1-4.
First character shows how many lamps are incorporated in
projector. (1,2 or 4 )
Second character shows following status in order of lamp number.
"I" Lamp is ON
"O" Lamp is OFF
"X" Lamp failure
e.g.
"1I" ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e 1 Iamp model and Lamp is ON
"2IOÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e 2 lamps model and No.1 Lamp is ON and No.2Lamp
is OFF
"4IOXI" ÿ e ÿ e ÿ e ÿ e 4 lamps model and No.1,No.4 lamps are ON. No.2
lamp is OFF and No.3 model is failed.
"Error Code"[CR]
"000_%1"[CR]
"0000000"~"0099999"
"?"[CR]
"000_%1"[CR]
"001"
"Error Code" [CR]
52/63