Functional Execution Command Table; Image Command Table; Pc Adjust Control Command Table; Input Control Command Table - Sanyo PLC-XL51 - 2700 Lumens Manual

PLC-XL51 Expand Serial Command Functional Specifications

5. Functional Execution Command Table

5.1 Image Command Table

Execute command
CF_BRIGHT_%1[CR]
CF_CONT_%1[CR]
CF_COLOR_%1[CR]
CF_TINT_%1[CR]
CF_SHARP_%1[CR]
CF_GAMMA_%1[CR]
CF_WBAL-R_%1[CR]
CF_WBAL-G_%1[CR]
CF_WBAL-B_%1[CR]
CF_COLTEMP_%1[CR]
CF_PROGV_%1[CR]
CF_NZRED_%1[CR]
CF_IMAGE_%1[CR]
CF_IMAGEADJ_%1[CR]

5.2 PC Adjust Control Command Table

Execute command
CF_FSYNC_%1[CR]
CF_TDOTS_%1[CR]
CF_CLAMP_%1[CR]
CF_H-POS_%1[CR]
CF_V-POS_%1[CR]
CF_DDOTS_%1[CR]
CF_DLINE_%1[CR]
CF_PCSTORE_%1[CR]
CF_PCMODEFREE_%1[CR]

5.3 Input Control Command Table

Execute command
CF_INPUT_%1[CR]
CF_SOURCE_%1[CR]
CF_INPUT1 _%1[CR]
CF_INPUT2_%1[CR]
CF_INPUT3_%1[CR]
CF_INPUT4_%1[CR]
CF_INPUT_%1_%2[CR]
CF_SYSTEM_%1[CR]

5.4 Screen Command Table

Execute command
CF_SCREEN_%1[CR]
CF_DZCENT_%1[CR]
CF_KEYSTONE_%1[CR]
CF_KYSTNMODE_%1[CR]
Set Brightness value
Set Contrast value
Set Color value
Set Tint value
Set Sharpness value
Set Gamma value
Set White Balance Red value
Set White Balance Green value
Set White Balance Blue value
Set Color Temp. value
Set /Cancel Progressive Scan
Set/Cancel Noise reduction
Set Image mode
Reset/Store for Image Adjustment
Item
Set Fine Sync value
Set Total Dots value
Set Clamp Value
Set Horizontal Position value
Set Vertical Position value
Set Display Dots value
Set Display Line value
Store the setting value of PC Adjust menu to Mode 1-5
Delete the registered value in Mode1-5 and return it to
Free status
Item
Select Input
Select Input Source
Select computer-1 and set Input selected in %1
Select computer-2 and set Input selected in %1
Select Video and set Input selected in %1
Select Wired and set Input selected in %1
Select Input and Source
Select System
Item
Select Screen size
Cancel Digital Zoom mode
Set Keystone
Set Keystone Store mode
9/63
Item