Input Control Command; Cf_Input Command; Cf_Source Command - Sanyo PLC-XL51 - 2700 Lumens Manual

PLC-XL51 Expand Serial Command Functional Specifications

8.6 Input Control Command

8.6.1

CF_INPUT Command

Command "CF_INPUT_%1"[CR]
"Computer1" ------------- Select Computer1 Input
"COMPUTER2" ----- Select Computer2 Input
"VIDEO" -------------- Select Video Input
"NETWORK" -------- Select Wired LAN
"WI" -------------------- Select Wireless LAN
%1
"UP" ------------------- Switch Input setting forward
"DN" -------------------Switch Input setting backward
Select Input
The same operation as "INPUT" button of the projector and Remote Control.
Details This command is available in normal Power ON status.
Note) Projector returns 101 by selecting Computer2 when Computer2 is set to
Monitor out.
Acceptable
Response
Unacceptable
8.6.2

CF_SOURCE Command

Command "CF_SOURCE_%1"[CR]
Input is
Computer 1
Input is
Computer 2
%1
Input is Video
Input is
Wired
Input is
Wireless
Select Source of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
Details
returns "101" and the command is not executed.
This command is available in normal Power ON status.
Response Acceptable
Computer1 → Computer2 → Video → Network → WI →
WI → Network → Video → Computer2 →Computer1→
"000"[CR]
"%%%"[CR]
"ANALOG" --------- Select Analog Input
"SCART" ----------- Select Scart Input
"UP" ---------------- Switch Input as follows
Analog → Scart → Analog...
"DN" ---------------- Switch Input as follows
Scart → Analog → Scart...
"ANALOG" --------- Select Analog Input
"UP"
"DN"
Although there is no other alternative than "Analog", projector
accepts parameter above.
"AUTO" -------------- Select Video Auto mode
"VIDEO" ------------- Select Composite Video Input
"Sÿ VIDEO" -------- Select S-Video Input
"YPBPR" ------------- Select Component Input
"UP" ------------------ Switch Input as follows
Auto → Video → S-video → YPBPR →
Auto...
"DN" ------------------ Switch Input as follows
YPBPR → S-video → Video → Auto →
S-video → YPBPR...
Network ------------- Select Wired Input
"UP"
"DN"
Although there is no other alternative than "Analog", projector
accepts parameter above.
Network ------------- Select Wireless Input
"UP"
"DN"
Although there is no other alternative than "Analog", projector
accepts parameter above.
"000"[CR]
22/63