Setting Command; Cf_Lang Command; Cf_Zoom Command; Cf_Uniformity Command - Sanyo PLC-XL51 - 2700 Lumens Manual

PLC-XL51 Expand Serial Command Functional Specifications

8.10 Setting Command

8.10.1 CF_LANG Command

Command "CF_LANG_%1"[CR]
"ENG" --------------------------- Select English
"DEU" --------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ----------------------------- Select Italian
"ESP" ---------------------------- Select Spanish
"POR" --------------------------- Select Portuguese
"NED" --------------------------- Select Dutch
"SVE" --------------------------- Select Swedish
%1
"RUS" --------------------------- Select Russian
"CHI" ---------------------------- Select Chinese
"KOR" --------------------------- Select Korean
"JPN" --------------------------- Select Japanese
"FIN" ---------------------------- Select
"POL" --------------------------- Select Polish
"HUN" -------------------------- Select
"ROM" -------------------------- Select
Set language for OSD
The language set by this command is stored in EEPROM and its setting is
Details
effective after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.2

CF_ZOOM Command

Command "CF_ZOOM_%1"[CR]
"RST"ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e S et Zoom store mode to "Reset"
%1 "STR1"ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e S et Zoom store mode to Store1
"STR2"ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e S et Zoom store mode to Store2
Select setting status of Zoom store mode. (Available only in the normal Power ON
status).
Details
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF.
Acceptable
Response
Unacceptable

8.10.3 CF_UNIFORMITY Command

Command "CF_UNIFORMITY_%1"[CR]
"RST"ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e S et Uniformity store mode to "Reset"
%1 "STR1"ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e S et Uniformity store mode to Store1
"STR2"ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e ÿ e S et Uniformity store mode to Store2
Select setting status of Uniformity store mode. (Available only in the normal Power
ON status).
Details
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF.
Acceptable
Response
Unacceptable
Finnish
Hungarian
Romanian
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
29/63