Epson PhotoPC 850Z User Manual page 91

1. Turn your camera's dial switch to
2. Press PrintMark. The Print Mark program's main
menu appears on the LCD monitor.
3. Press New settings.
Note:
If a previous DPOF file exists, a message appears to
confirm if you want to delete it. Press Done to
continue or Cancel.
4. Press the + button to select a one-per-sheet layout.
5. Press Select Image, and then the saved photos
appear on the LCD monitor.
6. Press the ISO or W.B. button to select a photo. A
white frame moves to indicate your selection. The
number at the bottom of the LCD monitor is a
frame number.
Note:
The Print Mark program can handle up to 1,000
photos. Even if the memory card has more photos,
the program cannot access the photos exceeding
the limit.
.
7. Press the + or - button to specify the number of
copies of the selected photo to print. You can
specify up to 99 copies. When you specify values
other than 00, the selection mark appears on the
selected photo. The value 00 implies no selection.
8. Repeat steps 6 and 7 to select other photos and
specify the number of copies.
9. Press BACK. The message appears to confirm how
many frames are selected.
10. Press Done to confirm your settings. If you
change your mind, press BACK to return to the
photo selection screen. To quit making a new
DPOF file, press Cancel.
11. If you need an index, press Add Index. Proceed
to the next step. If you do not need an index, skip
to step 15.
You can enlarge the preview of the selected photo
by pressing the enlargement icon button at the top
left of the LCD monitor. Press BACK to return to
the normal selection screen.
Using Print Mark to Print Photos
5
5-3