Making Settings In The Viewfinder Dial Position; Adjusting The Image Quality - Epson PhotoPC 850Z User Manual

3. Press the timer button on the top of the camera.
The timer icon appears on the display panel.
4. Press the shutter button. The timer icon and the
red timer light on the front of the camera flash
slowly for eight seconds, then rapidly for two
seconds before the shutter releases.
To take another picture using the self timer, you
need to press the timer button again.
Note:
To stop the self timer after pressing the shutter button,
press the shutter button again, or press the
button.
You can also use the self timer with the continuous
shooting feature. The camera takes up to ten pictures
in sequence, ten seconds after you press the shutter
button. To turn continuous shooting on, see "Using
the continuous shooting feature" on page 2-23.
Making Settings in the Viewfinder Dial
Position
You can use camera buttons to make a variety of
settings when taking pictures with the viewfinder.
This section explains how to make these settings.

Adjusting the image quality

The PhotoPC 850Z has four image quality settings.
Press the image quality button
cycle from one setting to another. You can see the
timer
currently selected image quality setting on the display
panel or LCD monitor. You can always switch freely
between these settings and mix pictures of varying
quality in the camera. The memory card's image
capacity will vary accordingly.
on the camera to
Fine (default setting)
Super fine
HyPict
Standard
Taking Pictures
2
2-7