Lcd Monitor And Display Panel Messages - Epson PhotoPC 850Z User Manual

LCD Monitor and Display Panel Messages

When printing with the Direct Print program, a
variety of status messages may appear on the camera's
LCD monitor or the printer's display panel. For
detailed explanations of these messages, see the
following tables.
LCD monitor messages
Message
No Photos in
Memory.
Please Select at
least one photo to
print.
Unsupported printer
model.
Please connect
supported model.
4-10
Using Direct Print to Print Photos
Explanation
This message appears when there
are no photos in memory. Press OK
to return to the previous screen.
There are no photos selected. Press
OK to return to the previous screen
and select a photo.
The camera is not connected to an
appropriate printer. Connect the
camera to a printer described on
page 4-2, then press any button to
make print settings. (To cancel
printing, hold down the MENU
button.
You selected Paper Size that your
printer does not support. Select an
appropriate paper size. (For
information on available paper
sizes, refer to your printer's
documentation.)
Connection or Printing was interrupted because of
printer error. a printer error. Clear the error, then
start printing again from the
beginning. (For information on
clearing printer errors, see your
printer's documentation.)
OK to erase printing You are about to erase the current
settings? print settings. To erase the settings,
press Yes.
Batteries are low. Battery power is almost out.
Use AC adapter. Connect the camera to the AC
adapter.
Error. An error occurred while the Direct
Settings reset to Print program was working. The
default. settings you have made returned to
their default values. To go back to
the main menu, press OK.
Insert a Memory There is no memory card in the
Card in the camera. Insert a memory card. For
camera. instructions, see "Installing and
removing a CompactFlash Card"
on page 1-10.
Printing canceled. You held down the MENU button
while printing. The printer stops
printing and ejects the paper. This
message disappears after three
seconds.
Printing canceled. An error occurred. The printer stops
Reset printer and printing and ejects the paper. This
camera. message disappears after three
seconds.