Deleting The Dpof File; Lcd Monitor Messages - Epson PhotoPC 850Z User Manual

Deleting the DPOF File

To delete your DPOF file, follow the steps below.
1. Turn your camera's dial switch to
2. Press PrintMark. The Print Mark program's main
menu appears on the monitor.
3. Press Delete. The message appears to confirm
deletion.
Press Done to execute deletion. To return to the
4.
main menu, press Cancel.
5. To quit the Print Mark program, press Exit.
Note:
Pressing New settings allows you to make a new DPOF
file.

LCD Monitor Messages

When you use the Print Mark program, you may see
error and status messages on the LCD monitor. For
.
detailed explanations of these messages, see the
following tables.
Message
No photos in
memory.
Error!
Unable to access
DPOF file.
No memory Card
Inserted.
Explanation
This message appears when there
are no photos in the memory
card. Press BACK to return to the
program selection menu. Turn off
the camera and insert a memory
card that contains photos.
This message appears when you
remove the memory card while
using the Print Mark program. Press
BACK to return to the main menu.
Turn off the camera and insert the
memory card.
Note:
Never remove the memory card
during operation, otherwise you
may not be able to use photos in
the memory card.
The memory card is not inserted in
the camera. Insert the memory
card and press BACK.
Using Print Mark to Print Photos
5
5-7