Changing The Color/Monochrome Setting; Making User Settings For White Balance - Epson PhotoPC 850Z User Manual

3. Press the + button to the select INT for the built-in
flash or EXT for the external flash.
4. Press BACK to return to the previous screen.
Note:
The external flash can work in all camera modes.
EPSON recommends you use the Manual camera
mode to use the external flash.
When you use the external flash, the internal flash
setting is disabled and the

Changing the color/monochrome setting

You can take both color and monochrome photos with
the PhotoPC 850Z. To select color or monochrome,
follow these steps.
Note:
The file size of photos is the same for color and monochrome.
1. Turn the dial switch to
2. Press Shot SETUP to change the setting screen.
3. Press the button at the bottom left to select Color
or B/W on the monitor.
4. Press BACK to return to the previous screen.
button does not work.
.

Making user settings for white balance

Following the steps below to create your own white
balance setting.
Note:
The custom white balance setting does not change when the
camera is turned off.
1. Turn the camera's dial switch to
2. Press Shot SETUP.
3. Press the W.B. button. A message appears asking
you if you want to save the new settings. Press Yes
to continue making settings.
4. Place a white sheet in front of the camera lens so
that it is previewed on the whole LCD monitor.
You can also use a colored sheet. For example, to
create a sepia hue, use a blue sheet. To create a
blue hue, use a yellow sheet. Experiment with
other colors for different effects.
Note:
To cancel the white balance setting, press BACK.
.
2-33
Taking Pictures
2