Correcting The Keystone Distortions - Hitachi CP-X467 Operating Manual

Operating

Correcting the keystone distortions

1.
Press KEYSTONE button on the remote
control. A dialog will appear on the screen to
aid you in correcting the distortion.
2.
Use the ▲/▼ cursor buttons to select AUTO, MANUAL or
PERFECT FIT operation, and press the ► button to perform
the following.
(1) AUTO executes automatic vertical keystone correction.
(2) MANUAL displays a dialog for keystone correction.
Use the ◄/► cursor buttons to select the direction to
correct (
(3) PERFECT FIT displays a dialog for the shape adjustment of the
projected image in each of the corners.
1) Choose the corner to adjust using the ▲/▼/◄/► buttons and
press the ENTER or INPUT button.
2) Use the ▲/▼/◄/► buttons to adjust the position of
the corner.
Press the ENTER or INPUT button to exit the
adjustment of the corner.
3) To adjust another corner, follow the same procedure
from 1) above.
To reset the adjustment of all the corners, select
RESET using the ▲/▼ buttons and press the ENTER
or INPUT button.
To close the dialog and complete this operation, press KEYSTONE button again.
Even if you do not do anything, the dialog will automatically disappear after a few
seconds.
● While the positions of the corners are adjusted with PERFECT FIT, keystone
adjustment feature is unavailable. To correct the keystone distortion, reset the
adjustment of all the corners.
● The adjustable range of this function will vary among inputs. For some input, this
function may not work well.
● When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP
menu, if the projector screen is inclined or angled downward, automatic vertical
keystone correction may not work correctly.
● When the zoom adjustment is set to the TELE (telephoto focus), this function may
be excessive. This function should be used when the zoom adjustment is set to
the full WIDE (wide-angle focus) whenever possible.
● When the projector is placed on the level (about ±3°), the automatic keystone
distortion correction may not work.
● When the projector is inclined to near ±30 degree or over, this function may not
work well.
● This function will be unavailable when Transition Detector is on (53).
22
or ) then use the ▲/▼ buttons for adjustment.
KEYSTONE button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
RESET
ESC