Hitachi CP-X467 Operating Manual page 48

OPTION menu
OPTION menu (continued)
Item
SERVICE
(continued)
(continued on next page)
48
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When
TURN ON is selected, the buttons on the projector except the
STANDBY/ON button are locked.
TURN ON ó TURN OFF
• Please use to avoid a mischief and touching accidentally. This
function does not have any effect on the remote control.
REMOTE FREQ.
Use the ▲/▼ button to change the projector's remote sensor
setting.
1:NORMAL ó 2:HIGH
Items with a checkmark are on. The factory
default setting is for both 1:NORMAL and
2:HIGH to be on. If the remote control does
not function correctly, set this to either only 1
or only 2 (15).
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled "INPUT -INFORMATION-".
It shows the information about the current input.
• The "FRAME LOCK" message on the dialog means the frame lock
function is working (34).
• The "SCART RGB" message means the COMPONENT port
is working as a SCART RGB input port. Please refer to the
COMPONENT item in INPUT menu (33).
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to TURN ON, the MY TEXT
is displayed together with the input information in the INPUT
-INFORMATION- box (55).
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By
this function, all the items in all of menus will collectively return to
the initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE, FILTER MESSAGE, SECURITY and MIU settings are
not reset.
RESET  CANCEL
Description