Hitachi CP-X467 Operating Manual page 34

INPUT menu
INPUT menu (continued)
Item
VIDEO FORMAT
HDMI
FRAME LOCK
COMPUTER IN
(continued on next page)
34
The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2) Using the ▲/▼ buttons switches the mode
for video format.
AUTO ó NTSC ó PAL ó SECAM
N-PAL ó M-PAL ó NTSC4.43
• This item is performed only for a video signal
from VIDEO port or S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
Using the ▲/▼ cursor buttons changes the HDMI signal mode.
AUTO ó NOMAL ó ENHANCED
AUTO
NORMAL
ENHANCED
•If the contrast of the screen image is too strong or too weak, try
finding a more suitable mode
Set the frame lock function on/off for each port.
(1) Using the ▲/▼ buttons to select one of following ports.
QUIT ó COMPUTER(IN)1 ó COMPUTER(IN)2 ó HDMI
(2) Using the ◄/► buttons to turns the
frame lock function on/off.
TURN ON ó TURN OFF
• This item can be performed only on a
signal with a vertical frequency of 50 to 60 Hz.
• When the TURN ON is selected, the moving pictures are displayed
more smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select TURN OFF.
The computer input signal type for COMPUTER IN1 and IN2 ports can be set.
(1) Use the ◄/► buttons to select the input port to be set.
COMPUTER (IN)1 ó COMPUTER (IN)2
(2) Use the ▲/▼ buttons to select the
computer input signal type.
AUTO ó SYNC ON G OFF
(continued on next page)
Description
Feature
Selecting the optimum mode automatically
Suitable for DVD singals(16-235)
Suitable for VGA signals(0-255)