Hitachi CP-X467 Operating Manual page 37

SETUP menu (continued)
Item
KEYSTONE
PERFECT FIT
WHISPER
(continued on next page)
Using the ▲/▼ buttons corrects the horizontal keystone distortion.
Shrink the right of the image ó Shrink the left of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
• This function will be unavailable when the Transition Detector is
on (53) or the PERFECT FIT (below) is adjusted.
This item allows you to adjust the shape of the projected image in
each of the corners.
(1) Choose the corner to adjust using
the ▲/▼/◄/► buttons and press the
ENTER or INPUT button.
(2) Use the ▲/▼/◄/► buttons to adjust
the position of the corner.
Press the ENTER or INPUT button to
exit the adjustment of the corner.
(3) To adjust another corner, follow the
same procedure from (1) above.
To reset the adjustment of all the corners, select RESET using
the ▲/▼ buttons and press the ENTER or INPUT button.
• While this item is adjusted, keystone adjustment feature (36,
above) is unavailable. To correct the keystone distortion, reset the
adjustment of all the corners.
• The adjustable range of this correction will vary among inputs. For
some input, this function may not work well.
• This function will be unavailable when the Transition Detector is
on (53).
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When WHISPER is selected, acoustic noise and screen brightness
are reduced.
Description
SETUP menu
37