Easy Menu; A Uto Keystone - Hitachi CP-X467 Operating Manual

EASY MENU

EASY MENU
From the EASY MENU, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons. Then
perform it according to the following table.
Item
ASPECT
AUTO
KEYSTONE
EXECUTE
KEYSTONE
KEYSTONE
PERFECT FIT
PICTURE MODE
(continued on next page)
26
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (  31).
Using the ► button executes the auto keystone function.
See AUTO KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
See KEYSTONE
Using the ◄/► buttons corrects the horizontal keystone distortion.
See the KEYSTONE
Using the ► button displays the dialog for the shape adjustment of
the projected image in each of the corners.
See the PERFECT FIT item in SETUP menu (37).
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP
settings. Choose a suitable mode according to the projected source.
NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
DAYTIME ó WHITEBOARD ó BOARD(GREEN)
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to GAMMA (28) and
COLOR TEMP (29) items in PICTURE menu.
• When this function is performed, a certain extra such as a line
may appear.
Description
EXECUTE item in SETUP menu (36).
item in SETUP menu (36).
item in SETUP menu (37).
COLOR TEMP
#2 MID
#3 LOW
#1 HIGH
#4 Hi-BRIGHT-1
#5 Hi-BRIGHT-2
#2 MID
#6 Hi-BRIGHT-3
GAMMA
#1 DEFAULT
#2 DEFAULT
#3 DEFAULT
#4 DEFAULT
#4 DEFAULT
#5 DEFAULT
#6 DEFAULT