Hitachi CP-X467 Operating Manual page 46

OPTION menu
OPTION menu (continued)
Item
MY BUTTON
MY SOURCE
SERVICE
46
(continued on next page)
This item is to assign one of the following functions to MY BUTTON 1 and 2
on the remote control (6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then
using the ▲/▼ buttons sets one of the following functions to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• HDMI: Sets port to HDMI.
• MIU: Sets port to MIU.
• COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays the INPUT-INFORMATION- (48) or MIU-
INFORMATION- (65) or nothing.
The displayed dialog is switched as below every time the MY BUTTON is pressed.
When an input signal is found:
INPUT -INFORMATION- ð MIU -INFORMATION- ð OFF
When an input signal is not found:
MIU -INFORMATION- ó OFF
• AUTO KEYSTONE
Performs automatic keystone distortion correction (36).
• MY MEMORY: Loads one of adjustment data stored (30).
When more than one data are saved, the adjustment changes every time
the MY BUTTON is pressed.
When no data is saved in memory, the dialog
"No saved data" appears.
When the current adjustment is not saved to
memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press the ◄ button to
quit. Otherwise loading a data will lose the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (26).
• FILTER RESET: Displays the filter time reset confirmation dialog (45).
• AV MUTE: Turns the picture and audio on/off.
• TEMPLATE: Makes the template pattern selected to the TEMPLATE item
(43) appear or disappear.
• MY IMAGE: Displays the MY IMAGE menu (64).
• LIVE MODE : Sets port to MIU and display an image on the LIVE mode.
While using the LIVE mode, the LIVE MODE SETTING menu is displayed.
• THUMBNAIL : Sets port to MIU and displays the THUMBNAIL screen.
• SLIDE SHOW : Sets port to MIU and starts the SLIDE SHOW display.
• DIRECTORY : Sets port to MIU and displays the DIRECTORY screen.
• REMOVE MEDIA : Displays the REMOVE MEDIA menu.
Using ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote control.
Select the picture input that is connected with a document camera.
COMPUTER (IN)1 ó COMPUTER (IN)2 ó HDMI
VIDEO ó S-VIDEO ó COMPONENT ó MIU
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or the
ENTER button to execute the item.
FAN SPEED ó AUTO ADJUST ó GHOST ó FILTER MESSAGE
FACTORY RESET ó INFORMATION ó REMOTE FREQ ó KEY LOCK
Description
: