Page 1 Projector CP-X4021N/CP-X5021N/ CP-WX4021N User's Manual (detailed) Operating Guide Thank you for purchasing this projector. ►Before using this product, please read all manuals for this WARNING product. Be sure to read User's Manual - Safety Guide rst. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual.
Page 2 Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference.
Page 3: Safety Precautions
Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet.
Page 4 Safety Precautions (continued) WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn.
Page 5 Safety Precautions (continued) WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.
Page 6 Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap.
Page 7 Safety Precautions (continued) CAUTION Remove the power cord for complete separation. • For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Disconnect the • Before cleaning, turn off and unplug the projector. Neglect could result in plug from the fire or electrical shock.
Page 8 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or repetitious use, the lifetime may be shortened, and these parts may need to be replaced even if one year has not passed since the beginning of using.
Page 9 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Page 10 Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 11: Table Of Contents
Contents Introduction ....3 SETUP menu ....43 Features ..... . 3 UTO KEYSTONE EYSTONE EYSTONE...
Page 12: Introduction
Introduction Introduction Features The projector provides you with the broad use by the following features. This projector has a variety of I/O ports that supposedly cover for any business scene. The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen. This projector has a 1.7 times optical zoom, horizontal and vertical manual lens shift, allowing exible installation.
Page 13: Part Names
Introduction Part names Projector (1) Lamp cover ( The lamp unit is inside. 19, 46) (2) Speakers (x2) ( (3) Filter cover ( The air lter and intake vent are inside. (4) Elevator feet (x2) ( (5) Elevator buttons (x2) ( (6) Remote sensor ( (7) Lens ( (8) Lens cover...
Page 14 Introduction Part names (continued) Control panel and Lens adjusters (1) Lens adjuster door (2) FOCUS ring ( (3) ZOOM ring ( (4) HORIZONTAL (horizontal) adjuster ( (5) VERTICAL (vertical) adjuster ( (6) LOCK (horizontal lens position lock) ( (7) STANDBY/ON button ( (8) INPUT button ( (9) MENU button ( (10) SECURITY indicator (...
Page 15 Introduction Part names (continued) Remote control (10) (1) VIDEO button ( MY SOURCE/ (2) COMPUTER button ( VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK (3) SEARCH button ( (16) (12) FREEZE PAGE VOLUME MAGNIFY (4) STANDBY/ON button ( (14) DOWN (5) ASPECT button ( (11) (13)
Page 16: Setting Up
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. For the case of installation in a special state such as ceiling mount, the specied mounting accessories ( in the ) and service may be required. Before installing the projector, consult your dealer about your installation.
Page 17 Setting up Arrangement (continued) (1280X800) (±10%) T-2: CP-WX4021N 16:10 Screen Projection Screen Projection Screen height Screen height size distance size distance min. max. min. (inch) m m inch m inch cm inch cm inch m inch inch cm inch cm inch 30 0.6 0.4 0.9 36 1.5 61 44 17 4 2 0.6 0.5 1.0 41 1.8 69 51 20 6 40 0.9 0.5 1.2 49 2.1 82 59 23 5...
Page 18 Setting up Arrangement (continued) ►Do not install the projector near thermally conductive or WARNING ammable things. Such things when heated by the projector could result in a re and burns. • Do not place the projector on a metal stand. ►Do not place the projector where any oils, such as cooking or machine oil, are used.
Page 19: Connecting With Your Devices
Setting up Connecting with your devices Before connecting the projector to a device, consult the manual of the device to conrm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged.
Page 20 Setting up Connecting with your devices (continued) Computer • Before connecting the projector to a computer, consult the computer’s NOTE manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector. - Some signal may need an adapter to input this projector.
Page 21 Setting up Connecting with your devices (continued) Computer Access point storage device ► Before connecting the projector to a network system be sure CAUTION to obtain the consent of the administrator of the network. ►Do not connect the LAN port to any network that might have the excessive voltage.
Page 22 Setting up Connecting with your devices (continued) Digital VCR/DVD/Blu-ray Disc player video device • The HDMI port of this model is compatible with HDCP (High-band- NOTE width Digital Content Protection) and therefore capable of displaying a video signal from HDCP compatible DVD players or the like. - The HDMI supports the following video signals: 480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50/60,1080p@50/60 - This projector can be connected with another equipment that has HDMI con-...
Page 23 Setting up Connecting with your devices (continued) Monitor Speakers (with an amplier) Microphone Wired system remote control (optional) • If a loud feedback noise is produced from the speaker, move the NOTE microphone away from the speaker. • This projector doesn't support plug-in power for the microphone. Microphone function •...
Page 24: Connecting To A Power Supply
Setting up Connecting to a power supply Put the connector of the power cord into the AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER AC IN indicator will light up in steady orange.
Page 25: Remote Control
Holding the hook part of the battery cover, remove it. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. Replace the battery cover in the direction of the arrow and snap it back into place.
Page 26: Changing The Frequency Of Remote Control Signal
Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control MY SOURCE/ COMPUTER VIDEO DOC.CAMERA does not function properly, attempt to change the signal frequency. ASPECT AUTO SEARCH...
Page 27: Power On/Off
Power on/off Power on/off Turning on the power Make sure that the power cord is rmly and STANDBY/ON button correctly connected to the projector and the outlet. POWER indicator Make sure that the POWER indicator is 97). Then remove the lens steady orange ( cover.
Page 28: Operating
Operating Operating VOLUME +/- button Adjusting the volume MY SOURCE/ VIDEO COMPUTER DOC.CAMERA Use the VOLUME +/VOLUME - buttons to adjust the volume. ASPECT AUTO SEARCH BLANK A dialog will appear on the screen to aid you in adjusting the MAGNIFY FREEZE PAGE...
Page 29 Operating Selecting an input signal (continued) Press COMPUTER button on the remote control. COMPUTER button Each time you press the button, the projector switches its input port from the current port as below. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA COMPUTER IN1 COMPUTER IN2 ASPECT AUTO...
Page 30: Searching An Input Signal
Operating Searching an input signal SEARCH button Press SEARCH button on the remote control. The projector will start to check its input ports as below in MY SOURCE/ VIDEO COMPUTER DOC.CAMERA order to nd any input signals. ASPECT AUTO SEARCH BLANK When an input is found, the projector will stop searching MAGNIFY...
Page 31: Adjusting The Projector's Elevator
Operating Adjusting the projector’s elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees.
Page 32: Adjusting The Lens
Operating Adjusting the lens Use the ZOOM ring to adjust the screen FOCUS ring size. ZOOM ring Use the FOCUS ring to focus the picture. LOCK (Horizontal adjuster lock) Turn the VERTICAL adjuster fully counter HORIZONTAL clockwise. Then turn it clockwise and adjust adjuster the vertical lens position upward.
Page 33: Using The Automatic Adjustment Feature
Operating Using the automatic adjustment feature AUTO button Press AUTO button on the remote control. Pressing this button performs the following. MY SOURCE/ COMPUTER VIDEO DOC.CAMERA For a computer signal ASPECT AUTO SEARCH BLANK The vertical position, the horizontal position and the horizontal FREEZE PAGE VOLUME...
Page 34: Correcting The Distortion
Operating Correcting the distortion To correct the distortion of projected screen, you can select one of three options, AUTO, MANUAL and PERFECT FIT. AUTO: performs the automatic vertical keystone correction. ( MANUAL: allows you to adjust the vertical and horizontal keystone. PERFECT FIT: allows you to adjust each of the screen corners and sides to correct the distortion.
Page 35 Operating PERFECT FIT When PERFECT FIT is pointed at, pressing the ► or ENTER button displays the KEYSTONE_PERFECT FIT dialog. If it is necessary to initialize the current adjustment, point at RESET in the dialog with the RESET button, and press the ENTER or INPUT button.
Page 36: Using The Magnify Feature
Operating Using the magnify feature Press the MAGNIFY ON button on the remote control. MAGNIFY ON/OFF button The picture will be magnied, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the rst time after the projector is turned on, the MY SOURCE/ VIDEO COMPUTER...
Page 37: Temporarily Freezing The Screen
Operating Temporarily freezing the screen FREEZE button Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen (however, MY SOURCE/ VIDEO COMPUTER DOC.CAMERA the indication will not appear when the OFF is selected for AUTO ASPECT SEARCH...
Page 38: Using The Menu Function
Operating Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, SECURITY and EASY MENU. EASY MENU consists of functions often used, and the other menus are classied into each purpose and brought together as the ADVANCED MENU. Each of these menus is operated using the same methods.
Page 39 Operating Using the menu function (continued) To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ●...
Page 40: Easy Menu
EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description Using the ◄/► buttons switches the mode for aspect ratio. ASPECT 36).
Page 41 EASY MENU Item Description Using the ◄/► buttons turns off/on the Eco mode. ECO MODE 44). See the ECO MODE item in SETUP menu ( Using the ◄/► buttons switches the mode for mirror status. MIRROR 44). See the MIRROR item in SETUP menu ( Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE.
Page 42: Picture Menu
PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description Using the ◄/►...
Page 43 PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH 1 CUSTOM 2 MID 2 CUSTOM 6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM 5 CUSTOM 5 Hi-BRIGHT-2 4 CUSTOM 4 Hi-BRIGHT-1 To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ►...
Page 44 PICTURE menu Item Description Using the ◄/► buttons adjusts the sharpness. Weak Strong SHARPNESS • There may be some noise and/or the screen may icker for a moment when an adjustment is made. This is not a malfunction. Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION THEATER PRESENTATION : The active iris displays the best presentation...
Page 45: Image Menu
IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 46: Position
IMAGE menu Item Description Using the ◄/► buttons adjusts the vertical position. Down • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when the V POSITION is selected will reset the V POSITION to the default setting.
Page 47 IMAGE menu Item Description Using the ◄/► buttons adjusts the horizontal phase to eliminate icker. Right Left H PHASE • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI port.
Page 48: Input Menu
INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 49 INPUT menu Item Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO NTSC SECAM VIDEO FORMAT N-PAL M-PAL...
Page 50 INPUT menu Item Description The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► buttons to select the computer input signal type. AUTO SYNC ON G OFF •...
Page 51: Resolution
INPUT menu Item Description The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
Page 52: Setup Menu
SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 53: Perfect Fit , A
SETUP menu Item Description Using the ▲/▼ buttons corrects the vertical keystone distortion. Shrink the top of the image Shrink the bottom of the image. • The adjustable range of this function will vary among inputs. For some input, this function may not work well. KEYSTONE •...
Page 54 SETUP menu Item Description Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING. NORMAL SAVING When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below: • When SAVING is selected, the RS-232C communication control except to turn the projector on and the network function are disabled while the projector is in the standby mode.
Page 55: Audio Menu
AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.
Page 56: Hdmi Audio , M
AUDIO menu Item Description Using the ▲/▼ buttons switches the mode for the HDMI audio. Check each of the two modes provided and select the suitable one HDMI AUDIO for your HDMI audio device. Using the ▲/▼ buttons switches the input level to match that of the microphone connected to the MIC port.
Page 57: Screen Menu
SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 58 SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.
Page 59 SCREEN menu Item Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. When the ON is selected, the item MyScreen is locked. Use this MyScreen Lock function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the 72).
Page 60 SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼...
Page 61 SCREEN menu Item Description (6) The current name will be displayed on the rst line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄...
Page 62 SCREEN menu Item Description The C.C. is the function that displays a transcript or dialog of the audio portion of a video, les or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C.
Page 63: Option Menu
OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME.
Page 64 OPTION menu Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically. AUTO POWER When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the...
Page 65 OPTION menu Item Description The lamp time is the usage time of the lamp, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog. To reset the lamp time, select the OK using the ►...
Page 66 OPTION menu Item Description This item is to assign one of the following functions to MY BUTTON 1/2 on the remote control ( (1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY BUTTON - (1/2) and press the ► or ENTER button to display the MY BUTTON setup dialog.
Page 67 OPTION menu Item Description • ACTIVE IRIS: Changes the active iris mode. 31). • PICTURE MODE: Changes the PICTURE MODE ( 56). • FILTER RESET: Displays the lter time reset conrmation dialogue ( • TEMPLATE: Makes the template pattern selected to the MY BUTTON 52) appear or disappear.
Page 68 OPTION menu Item Description Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
Page 69 OPTION menu Item Description KEY LOCK (1) Use the ▲/▼ buttons to choose the operations control. CONTROL PANEL REMOTE CONTROL (2) Use the ◄/► buttons to select ON or OFF. Selecting ON in Step 2 locks the buttons except STANDBY/ON on the operations control selected in Step 1.
Page 70 OPTION menu Item Description COMMUNICATION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands ( Network Bridge Function in the...
Page 71 OPTION menu Item Description RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF: Select this mode if it is not required to check the responses from the device that the projector sends data to.
Page 72 OPTION menu Item Description INFORMATION Selecting this item displays a dialog titled “INPUT_INFORMATION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • The “SCART RGB” message means the COMPONENT ports is working as a SCART RGB input port.
Page 73: Network Menu
NETWORK menu NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions.
Page 74 NETWORK menu Item Description Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF. IP ADDRESS • The IP ADDRESS is the number that identies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.
Page 75 NETWORK menu Item Description (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the rst 3 lines.
Page 76 NETWORK menu Item Description Selecting this item displays the MY IMAGE menu. To store images in the projector, the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( My Image Function in the User’s manual - Network Guide) and the ►...
Page 77 NETWORK menu Item Description Selecting this item displays the PRESENTATION menu. Use ▲/▼ buttons to select one of the following items, then press ► or ENTER button to use the function. If you set a computer to the Presenter mode while its image is projected, the projector is occupied by the computer and access from any other computer is blocked.
Page 78 NETWORK menu Item Description • To change from Multi PC mode to Single PC mode, select one of computers in the dialog using the ▲/▼/◄/► buttons and press the ENTER or INPUT button. Press the ► button to choose OK, and then press ENTER or INPUT again.
Page 79: Service
NETWORK menu Item Description Selecting this item displays the NETWORK_INFORMATION dialog for conrming the network settings. INFORMATION • For the details of PASSCODE, see the section Selecting the network connection method in the User’s manual – Network Guide. • Only the first 16 characters of the projector name are displayed. •...
Page 80: Security Menu
SECURITY menu SECURITY menu This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. To use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1.
Page 81: Myscreen Password
SECURITY menu Item Description The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ►...
Page 82 SECURITY menu Item Description PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 Turning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu.
Page 83: Transition Detector
SECURITY menu Item Description If this function is set to ON when the vertical angle of the projector or MIRROR setting at which the projector is turned on is different than the previously recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal.
Page 84 SECURITY menu Item Description The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. •...
Page 85: M Y Text Display
SECURITY menu Item Description (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► or ENTER button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select on or off.
Page 86: Presentation Tools
Presentation tools Presentation tools The projector has the following two convenient tools that enable on-screen presentations easily and quickly: below) - PC-LESS Presentation ( - USB Display ( PC-LESS Presentation The PC-LESS Presentation reads image data from storage media inserted into the USB TYPE A port and displays the image on the following modes.
Page 87 Presentation tools PC-LESS Presentation (continued) Thumbnail mode The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen. If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select some images in the Thumbnail mode.
Page 88 Presentation tools PC-LESS Presentation (continued) Operating by buttons or keys You can control the images in the Thumbnail screen with the remote control or keypad or a web browser software. The following functions can be supported while the Thumbnail is displayed. Button operation Functions The keypad on...
Page 89 Presentation tools PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen You can also control the images by using the menu on the Thumbnail screen. Item Functions Moves to an upper folder. SORT Allows you to sort les and folders as following. Press the ►...
Page 90 Presentation tools PC-LESS Presentation (continued) • These operations are not accessible while the projector OSD is displayed. NOTE • The Thumbnail mode shows 20 pictures in 1 page as maximum. • It is not possible to change the input port by using the INPUT button when the Thumbnail screen, Slideshow, or Full Screen is displayed.
Page 91: Full Screen Mode
Presentation tools PC-LESS Presentation (continued) Full Screen Mode The Full Screen mode shows a full display image. To display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control or the INPUT button on the keypad, or click [ENTER] on the Web Remote Control.
Page 92 Presentation tools PC-LESS Presentation (continued) Slideshow mode The Slideshow mode displays images in full screen and switches the images at 78). intervals set in INTERVAL on the Thumbnail screen menu ( You can start this function from the Slideshow menu. To display the Slideshow menu, select the SLIDESHOW button in the Thumbnail mode and press the ENTER button on the remote control or INPUT button on the projector.
Page 93 Presentation tools PC-LESS Presentation (continued) You can play the Slideshow at your desired conguration. Congure the Slideshow items in the Thumbnail. 1) RETURN : Returns to the thumbnail mode. 2) PLAY : Play the Slideshow. 3) START : Set the beginning number of the Slideshow.
Page 94 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text le, which decides the order of displayed still image les in the Thumbnail or Slideshow. The playlist le name is “playlist.txt” and it can be edited on a computer. It is created in the folder that contains the selected image les when the PC-LESS Presentation is started or the Slideshow is congured.
Page 95 Presentation tools USB Display 10). The projector can display images transferred from a computer via an USB cable ( Hardware and software requirement for computer • OS: One of the following. (32 bit version only) Windows ® XP Home Edition /Professional Edition Windows Vista ®...
Page 96 Presentation tools USB Display (continued) Right-Click menu The menu shown in the right will be displayed when you right-click the application icon in the Windows notication area. Display : The Floating menu is displayed, and the icon disappears from the Windows notication area.
Page 97: Usb Display
Presentation tools USB Display (continued) Options window If you select the Option button on the Floating menu, the Options window is displayed. Optimize Performance The “LiveViewer Lite for USB” captures screenshots in JPEG data and sends them to the projector. The “LiveViewer Lite for USB” has two options that have different compression rate of JPEG data.
Page 98: Replacing The Lamp
Maintenance Maintenance Replacing the lamp A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
Page 99: Lamp Warning
Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE ►The projector uses a high-pressure mercury glass lamp. The lamp WARNING can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
Page 100 Maintenance Please check and clean the air lter periodically. When the indicators or a message prompts you to clean the air lter, comply with it as soon as possible. The air lter of this projector consists of a lter cover and a lter unit with two types of lter.
Page 101: Cleaning And Replacing The Air Lter
Maintenance Cleaning and replacing the air lter (continued) Put the lter cover back into the place. Turn the projector on and reset the lter time using the FILTER TIME item in the EASY MENU. (1) Press the MENU button to display a menu. (2) Point at the FILTER TIME using the ▲/▼...
Page 102: Replacing The Internal Clock Battery
This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL, part number CR2032 or CR2032H. Turn the projector off, and unplug the power cord. Allow the projector to cool sufciently.
Page 103: Other Care
Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is awed, soiled or fogged, it could cause deterioration of display quality.
Page 104: Related Messages
Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. ►Never use the projector if abnormal operations such as smoke, WARNING Troubleshooting strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect the power plug from the power outlet.
Page 105 Troubleshooting Related messages (continued) Message Description The internal temperature is rising. Please turn the power off, and allow the projector to cool down at least 20 minutes. After having conrmed the following items, please turn the power ON again. • Is there blockage of the air passage aperture? •...
Page 106: Regarding The Indicator Lamps
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. For the SECURITY indicator, see SECURITY INDICATOR in the SECURITY menu. POWER LAMP TEMP Description indicator...
Page 107: Shutting The Projector Down
Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator There is a possibility that the interior portion has become heated. Please turn the power off, and allow the projector to cool down at least Blinking 20 minutes. After the projector has sufciently cooled down, please make conrmation of the following items, and then turn the power on again.
Page 108: Phenomena That May Be Easy To Be Mistaken For Machine Defects
Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Reference Phenomenon Cases not involving a machine defect page The electrical power cord is not plugged in. Correctly connect the power cord.
Page 109 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. 10 ~ 14 Correctly connect the audio cables. The MUTE function is working. Restore the sound pressing MUTE or VOLUME +/- button on the remote control.
Page 110 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Video screen The FREEZE function is working. display freezes. Press FREEZE button to restore the screen to normal. Color settings are not correctly adjusted.
Page 111 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The computer The computer cannot start up in the current hardware connected to the conguration. USB TYPE B port Disconnect the USB cable from the computer, then of the projector reconnect it after starting up the computer.
Page 112 Specications Please see the Specications in the User’s Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party copyrights for each of such software modules.
Page 113 Projector CP-X4021N/CP-X5021N/ CP-WX4021N User's Manual (detailed) Network Guide Thank you for purchasing this product. This manual is intended to explain only the network function. For proper use of this product, please refer to this manual and the other manuals for this product. ►Before using this product, be sure to read all manuals for this WARNING product.
Page 114 Contents Contents 1. Connection to the Network ............4 1.1 System requirements ................. 4 1.1.1 Required equipment preparation ..................4 1.1.2 Hardware and software requirement for computer ............4 1.2 Installing the “LiveViewer” ................6 1.2.1 Installing the “LiveViewer” ....................6 1.2.2 Updating the “LiveViewer”...
Page 115 Contents 3. Web Control ................45 3.1 Logon ....................... 46 3.2 Network Information ................. 48 3.3 Network Settings ..................49 3.4 Port Settings ..................... 50 3.5 Mail Settings ..................... 52 3.6 Alert Settings .................... 53 3.7 Schedule Settings ..................55 3.8 Date/Time Settings ...................
Page 116: Connection To The Network
1. Connection to the network 1. Connection to the network 1.1 System requirements 1.1.1 Required equipment preparation The following equipments are required to connect the projector to your computer through the network. Projector LAN cable (to connect the projector to a network): CAT-5 or greater Computer (minimum 1 set): equipped with the network feature (100Base-TX or 10Base-T) 1.1.2 Hardware and software requirement for computer...
Page 117 1. Connection to the network 1.1 System requirements (continued) • Referring to the manual of your computer or Windows, select the NOTE following or a smaller display resolution for the computer. CP-X4021N, CP-X5021N: 1024 x 768 (XGA) CP-WX4021N: 1280 x 800 When a resolution larger than the specied resolution is selected, the projector will convert and display in the specied resolution, and the display speed may become faster.
Page 118: Installing The "Liveviewer
1. Connection to the network 1.2 Installing the “LiveViewer” 1.2.1 Installing the “LiveViewer” The “LiveViewer” software needs to be installed on all the computers to connect to the projector through a network. You need to log in as an administrator user to install the software. 1) Turn on the computer.
Page 119: Updating The "Liveviewer
(2) The “LiveViewer” will appear in that folder if the installation was successful. 1.2.2 Updating the “LiveViewer” Please check and get the latest version at Hitachi Web site. http://www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com Some functions explained in this manual require the “LiveViewer” Version 4.xx. (In...
Page 120: Process To Connect The Network
1. Connection to the network 1.3 Process to connect the network Before connecting your computer and projector via a network, make sure that the LAN port is selected as the input source on the projector. ( Operating in the User’s Manual – Operating Guide) Otherwise a connection cannot be established. 1.3.1 Process overview An overview of the process to connect your computer and the projector via a network is shown below.
Page 121: Starting The "Liveviewer
1. Connection to the network 1.3 Process to connect the network (continued) 1.3.2 Starting the “LiveViewer” Start the “LiveViewer” in your computer, taking one of the followings. 1) Double click the “LiveViewer” icon on the Desktop in your computer 2) Select “Start” → “All Programs” → “Projector Tools” → “LiveViewer” on Windows menu.
Page 122: Selecting The Network Connection Mode
1. Connection to the network 1.4 Selecting the network connection mode After starting the “LiveViewer”, the “Select the Network Connection” screen comes up. Select the network connection that you would like to use. There are 3 options in the menu. •...
Page 123 1. Connection to the network 1.4 Selecting the network connection mode (continued) A network connection was not established. The screen is displayed in the case that the projector is not connected with a LAN cable to your computer when the wired LAN is selected.
Page 124: Selecting My Connection
1. Connection to the network 1.4 Selecting the network connection mode (continued) 1.4.2 Selecting My Connection Select the [My Connection] and click the [Connect]. If you select the My Connection, the computer is connected to the projector through the network by using the prole data that is pre- assigned to My Connection.
Page 125 1. Connection to the network 1.4 Selecting the network connection mode (continued) Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click the [Yes]. Proceed to item 1.8 Conrming the connection to your destination.
Page 126: Selecting The Network Connection Method
1. Connection to the network 1.5 Selecting the network connection method There are some options to connect to the network. • Enter PassCode • Congure Manually • Select From List Select one of them to meet your requirement. Enter PassCode If you want to use the Passcode for network connection, select the [Enter PassCode] and click the [Next].
Page 127: Passcode Connection
1. Connection to the network 1.5 Selecting the network connection method (continued) 1.5.1 Passcode connection The unique Passcode system brings you very quick and simple connection to the network. The Passcode is a code that expresses the network setting in the projector. If you input the code in the “LiveViewer”...
Page 128 1. Connection to the network 1.5 Selecting the network connection method (continued) Method 2 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on the projector to show the menu on screen.
Page 129 1. Connection to the network 1.5 Selecting the network connection method (continued) (2) Entering the Passcode If you select [Enter PassCode] at item 1.5, the “Please enter the PassCode” screen is displayed. Please enter the Passcode divided 4-digit each in 3 boxes (total 12-digit). Example PASSCODE: 1234 - 5678 - 9ABC After entering the Passcode, click the [Connect] to start the connection to the projector.
Page 130 1. Connection to the network 1.5 Selecting the network connection method (continued) A network connection could not be established. Windows prevented network conguration changes. You may log in the Windows under User authority. Click the [OK], then the “LiveViewer” main menu is displayed even though the network is not established.
Page 131 1. Connection to the network 1.5 Selecting the network connection method (continued) If you put a check mark in the box “Not displaying conrmation dialog for adding Network settings”, the projector memorizes current conguration and this dialog is not displayed again. To display this dialog again, click Option icon in the “LiveViewer”...
Page 132 1. Connection to the network 1.5 Selecting the network connection method (continued) Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click the [Yes]. Proceed to item 1.8 Conrming the connection to your destination.
Page 133 1. Connection to the network 1.5 Selecting the network connection method (continued) (3) Conﬁguring manually 17), you are required to enter the network After entering the Passcode ( conguration manually if you use a Subnet mask other than Class A, B or C. ( 22).
Page 134 1. Connection to the network 1.5 Selecting the network connection method (continued) Wired LAN 1) Enter the following information for the projector. Subnet mask *1: 255.255.255.128 (example) 2) Click the [Connect]. 3) The network connection will be established. Proceed to item 1.8 Conrming the connection to your destination.
Page 135 1. Connection to the network 1.6 Manual conﬁguration There are 3 options for the manual conguration. below) • Prole ( • History ( • Congure Network Settings Manually ( If you select Congure Network Settings Manually, proceed to item 1.7 Conguring the network settings manually.
Page 136: Manual ConGuration
1. Connection to the network 1.6 Manual conguration (continued) 1.6.2 History connection The “LiveViewer” can memory the network settings when connecting to the projector as a history record. After that, selecting a history record can quickly connect the network with the projector.
Page 137 1. Connection to the network 1.7 Conﬁguring the network settings manually All setting for the network connection between the projector and computer is input manually. Select the [Congure Network Settings Manually]. The information to be input manually is different, depending on how you want to connect the projector and computer.
Page 138: ConGuring The Network Settings Manually
1. Connection to the network 1.7 Conguring the network settings manually (continued) Wireless LAN 1) The setting on the access point. *1 Enter the following information. SSID: WirelessAccessPoint (example) Encryption: WEP64bit (example) Encryption key *2: ********** (example) Mode: INFRASTRUCTURE 2) Click the [Next]. 3) Enter the following information that is set in the projector.
Page 139 1. Connection to the network 1.7 Conguring the network settings manually (continued) Wired LAN 1) Enter the following information for the projector. *1 IP address : 192.168.1.10 (example) Subnet mask : 255.255.255.0 (example) 2) Click the [Connect]. 3) The network connection will be established. Proceed to item 1.8 Conrming the connection to your destination.
Page 140 1. Connection to the network 1.7 Conguring the network settings manually (continued) If you need to add a Network conguration on your computer to connect to the projector. This dialog will be displayed when you need to add a Network conguration on your computer to connect to the projector.
Page 141: ConRming The Connection To Your Destination
1. Connection to the network 1.7 Conguring the network settings manually (continued) If the entered IP address and projector's IP address are the same, a warning dialog shown to the right will be displayed. Click the [OK], and then enter a different IP address from the projector's one in the dialog for changing Network conguration.
Page 142: Connection And Transmission
1. Connection to the network 1.8 Conﬁrming the connection to your destination 1.8.1 Connection and transmission When the network connection is established, the “Connection to Projector successful” screen is displayed. Make sure that the right projector that you want to send your image to is selected, by checking the projector name and IP address shown in the screen.
Page 143 1. Connection to the network 1.8 Conrming the connection to your destination (continued) A Slideshow is currently running on the projector that you are trying to display to. The projector you want to send your images to is in the Slideshow mode in the PC-LESS Presentation.
Page 144: Connection Error
1. Connection to the network 1.8 Conrming the connection to your destination (continued) 1.8.2 Connection error When the connection to the projector could not be established, an error message, “Network Connection not established”, will come up. Click the [OK] then the “LiveViewer” main menu is displayed even though the network is not established.
Page 145 1. Connection to the network 1.9 Proﬁle data 1.9.1 Outline of Proﬁle data The network setting to connect the projector and computer can be stored as a prole data. Once the data is stored, all you need to do is to select the data to connect to the network.
Page 146: ProLe Data
1. Connection to the network 1.9 Prole data (continued) 1.9.3 Editing Proﬁle data If necessary, the prole data can be edited on the Manual Conguration screen. ( 1) Select the [Prole], and select one of the data listed in the window. 2) Click the [Edit].
Page 147: Registering My Connection
1. Connection to the network 1.9 Prole data (continued) 1.9.4 Registering My Connection One of the prole data, which is often used, can be registered as the My Connection prole data. Once the data is registered, all you need to do is to select the My Connection to connect to the network.
Page 148 1. Connection to the network 1.9 Prole data (continued) Also, you can register a prole data to My Connection, when the network connection is established. When it is established, the “Connection to Projector successful” screen is displayed. ( If you wish to use the current connection setting for My Connection, check in the box for the [Register this setting to My Connection].
Page 149: Network Presentation
2. Network Presentation 2. Network Presentation 2.1 Using the “LiveViewer” When you get the connection between your projector and computer, the “LiveViewer” main menu will be shown on the computer screen. On the main menu you can congure settings and operate functions to send your images to the projector.
Page 150 2. Network Presentation 2.1 Using the “LiveViewer” (continued) Hold button The image on screen is temporally frozen. The last image before the button is clicked is remained on screen. You can revise the image data on your computer without showing it on the projector’s screen.
Page 151: Displaying The Status
2. Network Presentation 2.1 Using the “LiveViewer” (continued) 2.1.2 Displaying the status 1) Indicator The indicator shows the following status. Indicator Status Note The network connection to the projector is Not connected not established yet. The network connection is established, but Hold the image transmissions on hold.
Page 152: Switching The Display Mode
2. Network Presentation 2.1 Using the “LiveViewer” (continued) 2.1.3 Switching the display mode The “LiveViewer” has the Single PC mode and Multi PC mode. The modes can be switched on the main menu. 1) Click the button on the main menu. The buttons below are displayed.
Page 153: Option Menu
2. Network Presentation 2.1 Using the “LiveViewer” (continued) 2.1.4 Option menu Clicking the Option button displays the option menu on screen. “Not displaying conrmation dialog for adding Network settings” This setting allows you to choose to display or not the conrmation dialog for 19, 28) when you connect your computer adding a Network conguration ( to the projector.
Page 154 2. Network Presentation 2.1 Using the “LiveViewer” (continued) Presenter Mode In the Single PC mode, the projector can be occupied by one computer and can block an access from any other computer, if the Presenter mode is selected in the “LiveViewer”. While making your presentation, you don’t need to worry that the image on screen is unexpectedly switched to an image sent by another computer.
Page 155: Starting The Network Presentation
2. Network Presentation 2.2 Starting the Network Presentation This chapter explains the Network Presentation feature with which you can project computer images transmitted through a network. The “LiveViewer” allows you to project images from one or multiple computers by connecting the projector to an existing network without using computer cables. This Network Presentation feature helps you to smoothly make your presentations and conduct conferences.
Page 156: Presenter Mode
2. Network Presentation 2.2 Starting the Network Presentation (continued) 2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a computer, so that the projector can display images sent by up to 4 computers at the same time.
Page 157: Web Control
3. Web Control 3. Web Control You can adjust or control the projector via a network from a web browser on a computer that is connected to the same network. • Internet Explorer 6.0 or later is required. NOTE • If JavaScript is disabled in your web browser conguration, you must enable JavaScript in order to use the projector web pages properly.
Page 158: Logon
3. Web Control 3.1 Logon To use the Web Control function, you need to logon with your user name and password. ( Refer to the following for conguring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Display the logon window as shown on the right.
Page 159 3. Web Control 3.1 Logon (Continued) Below are the factory default settings for user name and password. User name Password Administrator <blank> If you logon successfully, the screen below will be displayed. Main menu 3) Click the desired operation or conguration item on the main menu.
Page 160: Network Information
3. Web Control 3.2 Network Information Displays the projector’s current network conguration settings. Item Description Displays the projector name settings. Projector Name Displays the DHCP conguration settings. DHCP Displays the current IP address. IP Address Displays the subnet mask. Subnet Mask Displays the default gateway.
Page 161: Network Settings
3. Web Control 3.3 Network Settings Displays and congures network settings. Item Description IP Conguration Congures network settings. Enables DHCP. DHCP ON Disables DHCP. DHCP OFF Congures the IP address when DHCP is disabled. IP Address Congures the subnet mask when DHCP is disabled. Subnet Mask Congures the default gateway when DHCP is disabled.
Page 162: Port Settings
3. Web Control 3.4 Port Settings Displays and congures communication port settings. Item Description Network Control Port1 Congures command control port 1 (Port:23). (Port:23) Click the [Enable] check box to use port 23. Port open Click the [Enable] check box when authentication is required Authentication for this port.
Page 163 3. Web Control 3.4 Port Settings (Continued) Item Description Congures the SNMP port. SNMP Port Click the [Enable] check box to use SNMP. Port open Congures the destination of the SNMP Trap in IP format. • The address allows not only IP address but also domain name if the valid DNS server is setup in the Network Trap address Settings.
Page 164: Mail Settings
3. Web Control 3.5 Mail Settings Displays and congures e-mail addressing settings. Item Description Click the [Enable] check box to use the e-mail function. Congure the conditions for sending e-mail under the Alert Send Mail Settings. Congures the address of the mail server in IP format. •...
Page 165: Alert Settings
3. Web Control 3.6 Alert Settings Displays and congures failure & alert settings. Item Description The lamp cover has not been properly xed. Cover Error Fan Error The cooling fan is not operating. The lamp does not light, and there is a possibility that interior Lamp Error portion has become heated.
Page 166 3. Web Control 3.6 Alert Settings (Continued) The Alert Items are shown below. Item Description Congures the time to alert. Alarm Time (Only Lamp Time Alarm and Filter Time Alarm.) Click the [Enable] check box to enable SNMP Trap alerts. SNMP Trap Click the [Enable] check box to enable e-mail alerts.
Page 167: Schedule Settings
3. Web Control 3.7 Schedule Settings Displays and congures schedule settings. Item Description Congures the daily schedule. Daily Congures the Sunday schedule. Sunday Congures the Monday schedule. Monday Congures the Tuesday schedule. Tuesday Congures the Wednesday schedule. Wednesday Congures the Thursday schedule. Thursday Congures the Friday schedule.
Page 168 3. Web Control 3.7 Schedule Settings (Continued) The schedule settings are shown below. Item Description Click the [Enable] check box to enable the schedule. Schedule Congures the month and date. This item appears only when Specic date (No. 1-5) is Date (Month/Day) selected.
Page 169 3. Web Control 3.7 Schedule Settings (Continued) • After the projector is moved, check the date and time set for the NOTE projector before conguring the schedules. Strong shock may make the date 58) get out of tune. and time settings ( •...
Page 170: Date/Time Settings
3. Web Control 3.8 Date/Time Settings Displays and congures the date and time settings. Item Description Congures the current date in year/month/day format. Current Date Congures the current time in hour:minute:second format. Current Time Click the [ON] check box to enable daylight savings time and Daylight Savings Time set the following items.
Page 171 3. Web Control 3.8 Date/Time Settings (Continued) Item Description Congures the time difference. Set the same time difference Time difference as the one set on your computer. If unsure, consult your IT manager. Click the [ON] check box to retrieve Date and Time SNTP information from the SNTP server and set the following items.
Page 172: Security Settings
3. Web Control 3.9 Security Settings Displays and congures passwords and other security settings. Item Description Congures the user name and password. User Account Congures the user name. User name The length of the text can be up to 32 alphanumeric characters.
Page 173: Projector Control
3. Web Control 3.10 Projector Control The items shown in the table below can be performed using the Projector Control menu. Select an item with the mouse. Most of the items have a submenu. Refer to the table below for details. •...
Page 174 3. Web Control 3.10 Projector Control (Continued) Item Description PICTURE BRIGHTNESS Adjusts the brightness setting. CONTRAST Adjusts the contrast setting. Selects the gamma setting. GAMMA Selects the color temperature setting. COLOR TEMP COLOR Adjusts the color setting. TINT Adjusts the tint setting. SHARPNESS Adjusts the sharpness setting.
Page 175 3. Web Control 3.10 Projector Control (Continued) Item Description SETUP AUTO KEYSTONE Performs the automatic keystone distortion setting. EXECUTE KEYSTONE V Adjusts the vertical keystone distortion setting. Adjusts the horizontal keystone distortion setting. KEYSTONE H Adjusts the shape of the projected image in each of the PERFECT FIT corners and sides.
Page 176 3. Web Control 3.10 Projector Control (Continued) Item Description AUDIO VOLUME Adjusts the volume setting. Turns the built-in speaker on/off. SPEAKER AUDIO SOURCE - Assigns the AUDIO SOURCE - COMPUTER IN1 input port. COMPUTER IN1 AUDIO SOURCE - Assigns the AUDIO SOURCE - COMPUTER IN2 input port. COMPUTER IN2 AUDIO SOURCE - Assigns the AUDIO SOURCE - LAN input port.
Page 177 3. Web Control 3.10 Projector Control (Continued) Item Description OPTION Turns the automatic signal search function on/off. AUTO SEARCH Turns the automatic keystone distortion correction function AUTO KEYSTONE on/off. Turns the direct power on function on/off. DIRECT POWER ON Congures the timer to shut off the projector when no signal AUTO POWER OFF is detected.
Page 178 3. Web Control 3.10 Projector Control (Continued) The items shown in the table below can be performed using the Projector Control menu. Click the [QUIT PRESENTER MODE]. Item Description SERVICE QUIT PRESENTER Quit compulsorily from the Presenter mode. MODE...
Page 179: Remote Control
3. Web Control 3.11 Remote Control You can use your Web browser to control the projector. • Do not attempt to control the projector with the projector’s remote control and via your Web browser at the same time. It may cause some operational errors in the projector.
Page 180: Projector Status
3. Web Control 3.12 Projector Status Displays and congures the current projector status. Item Description Displays the current error status Error Status Displays the usage time for the current lamp. Lamp Time Displays the usage time for the current lter. Filter Time Displays the current power status.
Page 181: Network Restart
3. Web Control 3.13 Network Restart Restarts the projector’s network connection. Item Description Restarts the projector’s network connection in order to Restart activate new conguration settings. • Restarting requires you to re-log on in order to further control or NOTE congure the projector via a web browser.
Page 182: My Image Function
MY IMAGE transmission requires an exclusive application for your computer. “PJImg/Projector Image Tool” is necessary to use MY IMAGE transmission. It can be downloaded from the Hitachi web site (http://www.hitachi-america.us/ digitalmedia or http://www.hitachidigitalmedia.com). Refer to the manual for the application for instructions.
Page 183 4. My Image Function 4. My Image Function (Continued) Congure the following items from a web browser when MY IMAGE function is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 184: Messeger Function
Messenger function requires an exclusive application for your computer. To edit, transfer and display the text data, use the application. You can download it from the Hitachi web site (http://www.hitachi-america.us/digitalmedia or http://www. hitachidigitalmedia.com). Refer to the manual for the application for the details of Messenger function and instructions of the application.
Page 185 5. Messenger Function 5. Messenger Function (Continued) Congure the following items from a web browser when Messenger function is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 186: Network Bridge Function
6. Network Bridge Function 6. Network Bridge Function This projector is equipped with the NETWORK BRIDGE function to perform mutual conversion of a network protocol and a serial interface. Using the NETWORK BRIDGE function, a computer that is connected with this projector by Ethernet communication can control an external device that is connected with this projector by RS-232C communication as a network terminal.
Page 187: Communication Setup
6. Network Bridge Function 6.2 Communication setup To congure the setup of the communication using NETWORK BRIDGE for the projector, use items in the COMMUNICATION menu. Open the menu of the projector and select the OPTION - SERVICE - COMMUNICATION menu. OPTION menu –...
Page 188: Transmission Method
6. Network Bridge Function 6.4 Transmission method The transmission method can be selected from the menus, only when the NETWORK BRIDGE is selected for the COMMUNICATION TYPE. OPTION menu – SERVICE – COMMUNICATION in the User’s Manual – Operating Guide) HALF-DUPLEX FULL-DUPLEX 6.4.1 HALF-DUPLEX...
Page 189: Full-Duplex
6. Network Bridge Function 6.4 Transmission method (Continued) • With using the HALF-DUPLEX method, the projector can send out NOTE 254 byte data as maximum at once. • If it is not required to monitor the response data from an external device and the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data from the computer and send it out to an external device continuously.
Page 190: Other Functions
7. Other Functions 7. Other Functions 7.1 E-mail Alerts The projector can automatically send an alert message to the specied e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error. • Up to ve e-mail addresses can be specied. NOTE •...
Page 191 7. Other Functions 7.1 E-mail Alerts (Continued) 5) Click the [Alert Settings] on the main menu to congure the E-mail Alerts settings. 53) for 6) Select and congure each alert item. Refer to item 3.6 Alert Setting ( further information. 7) Click the [Apply] button to save the settings.
Page 192: Projector Management Using Snmp
7. Other Functions 7.2 Projector Management using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.
Page 193: Event Scheduling
7. Other Functions 7.3 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector. • You can schedule the following control events: Power, Input Source, NOTE My Image, Messenger, Slideshow. ( •...
Page 194 7. Other Functions 7.3 Event Scheduling(Continued) Schedule Settings ( Schedule settings can be congured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 195 7. Other Functions 7.3 Event Scheduling(Continued) Date/Time Settings ( The Date/Time setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 196: Command Control Via The Network
7. Other Functions 7.4 Command Control via the Network You can congure and control the projector via the network using RS-232C commands. Communication Port The following two ports are assigned for the command control. TCP #23 (Network Control Port1 (Port: 23)) TCP #9715 (Network Control Port2 (Port: 9715)) •...
Page 197 7. Other Functions 7.4 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. 7) Click the [Security Settings] on the main menu. 8) Click the [Network Control] and enter the desired authentication password. * See NOTE.
Page 198 7. Other Functions 7.4 Command Control via the Network (Continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. ( “RS-232C Communication”...
Page 199 7. Other Functions 7.4 Command Control via the Network (Continued) Reply Data format The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Connection Reply 0x06...
Page 200 7. Other Functions 7.4 Command Control via the Network (Continued) Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled.
Page 201: Troubleshooting
8. Troubleshooting 8. Troubleshooting Reference Problem Likely Cause Things to Check Page Number The projector is not turned Is the projector’s lamp on? No image The projector’s input source Is the projector switched to *18, *19 isn’t switched to LAN. LAN? Check the network configurations of the...
Page 202 8. Troubleshooting 8. Troubleshooting (Continued) Reference Problem Likely Cause Things to Check Page Number The projector isn’t capable Switching the priority to ‘Transmission Speed’ under of relaying dynamic images The projected such as PowerPoint ® the options menu may help image is rather animation at full speed.
Page 203 8. Troubleshooting 8. Troubleshooting (Continued) Reference Problem Likely Cause Things to Check Page Number Others Communication between - Information from the the projector and computer projector to computer is Try “RESTART” in is not working well. not correct or completed SERVICE menu under the - The projector does not NETWORK Functions of...
Page 204: Warranty And After-Sales Service
9. Warranty and after-sales service 9. Warranty and after-sales service If a problem occurs with the equipment, please read 8. Troubleshooting ( section rst and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell you what warranty condition is applied.
Page 205 Projector CP-X4021N/CP-X5021N/ CP-WX4021N User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product.
Page 206: First Of All
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage.
Page 207: Regulatory Notices
CP-X4021N, CP-X5021N, CP-WX4021N Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has...
Page 208: About Waste Electrical And Electronic Equipment
Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available.
Page 209: Preparations
Holding the hook part of the battery cover, remove it. Align and insert the two AA batteries HITACHI MAXELL, Part No.LR6 or ) according to their plus and minus terminals as indicated in the remote control.
Page 210: Arrangement
Arrangement Refer to tables T-1 and T-2 at the back of this manual as well as the following to determine the screen size and projection distance. Projector top Projector bottom × : Screen size : Projection distance (from the projector’s end) : Screen height WARNING ►Install the projector where you can access the power outlet easily.
Page 211: Connecting With Your Devices
Connecting with your devices Before connecting the projector to a device, consult the manual of the device to conrm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged.
Page 212: Connecting Power Supply
Connecting power supply Put the connector of the power cord into the AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER AC IN indicator will light up in steady orange.
Page 213: Adjusting The Projector's Elevator
Adjusting the projector’s elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees.
Page 214: Displaying The Picture
Displaying the picture Activate your signal source. Turn the signal source on, and make it send the MY SOURCE/ VIDEO COMPUTER DOC.CAMERA AUTO ASPECT SEARCH BLANK signal to the projector. MAGNIFY FREEZE PAGE VOLUME VOLUME+ button Use the VOLUME + / VOLUME - buttons DOWN VOLUME- button to adjust the volume.
Page 215: Turning Off The Power
Displaying the picture (continued) CAUTION ►If you wish to have a blank screen while the projector's lamp is on, use one of methods below. - Use the supplied lens cover. - Use the BLANK function (see User’s Manual - Operating Guide). Taking any other action may cause the damage on the projector.
Page 216: Replacing The Lamp
Replacing the lamp A lamp has  nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
Page 217 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Page 218: Cleaning And Replacing The Air Lter
Cleaning and replacing the air ﬁ lter Please check and clean the air  lter periodically. When the indicators or a message prompts you to clean the air  lter, comply with it as soon as possible. The air  lter of this projector consists of a  lter cover and a  lter unit with two types of ...
Page 219 Cleasning and replacing the air lter (continued) Put the lter cover back into the place. Turn the projector on and reset the lter time using the FILTER TIME item in the EASY MENU. (1) Press the MENU button to display a menu. (2) Point at the FILTER TIME using the ▲/▼...
Page 220: Replacing The Internal Clock Battery
This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL, part number CR2032 or CR2032H. Turn the projector off, and unplug the power cord. Allow the projector to cool suf...
Page 221: Using The Cd Manual
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows ®...
Page 222: SpeciCations
Speciﬁcations Specication Item Product name Liquid crystal projector CP-X4021N, CP-X5021N: Liquid Crystal 786,432 pixels (1024 horizontal x 768 vertical) Panel CP-WX4021N: 1,024,000 pixels (1280 horizontal x 800 vertical) Lamp 245 W UHP Speaker 16 W mono (8 W x2) Power supply/ AC100-120 V: 4.0 A, AC220-240 V: 2.0 A Rated current Power...
Page 223: Troubleshooting - Warranty And After-Service
If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. Please check the following web address where you may nd the latest information for this projector. Product http://www.hitachi-america.us/digitalmedia information and Manuals : Production http://www.hitachidigitalmedia.com information : http://www.hitachiserviceeu.com/support/guides/...
Page 224 Projector CP-X4021N/CP-X5021N/ CP-WX4021N User's Manual (detailed) Operating Guide – Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9...
Page 225 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)
Page 226 Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. COMPUTER IN1, MONITOR OUT D-sub 15pin mini shrink jack <Computer signal> • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) •...
Page 227 Connection to the ports (continued) COMPUTER IN2 (G/Y, B/Cb/Pb, R/Cr/Pr, H, V) • BNC jack x 5 • Video : Analog 0.7Vp-p, 75Ω terminator • H/V, sync, : TTL level (positive/negative) • Composite sync, : TTL level COMPONENT (Y, Cb/Pb, Cr/Pr) RCA jack x3 •...
Page 228 Connection to the ports (continued) HDMI 10 12 14 • Type :Digital audio/video connector • Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz) 13 15 Signal Signal Signal T.M.D.S. Data2 + T.M.D.S. Data0 Shield 15 SCL T.M.D.S. Data2 Shield T.M.D.S.
Page 229 Connection to the ports (continued) USB TYPE A USB TYPE B USB A type jack USB B type jack Signal Signal - Data - Data + Data + Data Ground Ground CONTROL D-sub 9pin plug • About the details of RS-232C communication, 6 7 8 please refer to the section "RS-232C Communication".
Page 230 Connection to the ports (continued) To input SCART RGB signal; SCART SCART connector (jack) SCART cable (plug) RCA plugs To input SCART RGB signal to the projector, use a SCART to RCA cable. Connect the plugs refer to above ex.. For more reference, please consult your dealer.
Page 231 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication / Network 17). command table ( Connection Turn off the projector and the computer.
Page 232 RS-232C Communication (continued) Communicaion settings 1. Protocol 19200bps,8N1 ("h" shows hexadecimal) 2. Command format Byte Number Command Header Data Header Data Setting Action Type code size ag code Packet Action <SET>Change setting to desired value [(cL)(cH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(eL)(eH)].
Page 233 RS-232C Communication (continued) ("h" shows hexadecimal) 3. Response code / Error code (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the specied item by [Type], and it returns the code. (2) NAK reply : 15h When the projector cannot understand the received command, the projector returns the error code.
Page 234 Command Control via the Network Command Control via the Network When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network 17).
Page 235 Command Control via the Network (continued) Communicaion Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Congure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23.
Page 236: Command Control Settings
Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format Same as RS-232C communication, refer to RS-232C Communicaton command format. 2. Response code / Error code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4).
Page 237 Command Control via the Network (continued) ("h" shows hexadecimal) 2. Response code / Error code The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is same as the sending command format. (××h : connection ID) (1) ACK reply : 06h + ××h (2) NAK reply : 15h + ××h (3) Error reply : 1Ch + 0000h + ××h...
Page 238 Network Bridge Communication Network Bridge Communication This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by LAN communicaton, an external device that is connected with this projector by RS-232C communication can be controlled from the computer as a network terminal. For details, see the 3.7 Controlling the external device via the projector(using the NETWORK BRIDGE function) - Network Guide.
Page 239: Communication Settings
Network Bridge Communication Communication settings For communication setting, use the OPTION - SERVICE - COMMUNICATION menu. ( OPTION menu - SERVICE - COMMUNICATION in the User's Manual - Operating Guide) Item Condition BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (xed) PARITY...
Page 240 RS-232C Communication / Network command table RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
Page 241 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code CONTRAST Execute BE EF 06 00 A4 D2 06 00 01 70 00 00 Reset 1 DEFAULT BE EF 06 00 07 E9 01 00 A1 30 20 00...
Page 242 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 80 FE 02 00 96 30 00 00 User Gamma Increment BE EF 06 00 E6 FE 04 00 96 30 00 00 Point 7...
Page 243 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 BC F4 02 00 B7 30 00 00 COLOR TEMP Increment BE EF 06 00 DA F4 04 00 B7 30 00 00 OFFSET B...
Page 244 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 F1 82 02 00 01 21 00 00 H POSITION Increment BE EF 06 00 97 82 04 00 01 21 00 00 Decrement...
Page 245 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code AUTO BE EF 06 00 BA 77 01 00 13 22 00 00 VIDEO BE EF 06 00 2A 76 01 00 13 22 01 00 HDMI FORMAT COMPUTER...
Page 246 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 01 88 02 00 25 21 00 00 PERFECT FIT Increment BE EF 06 00 67 88 04 00 25 21 00 00 Left Bottom -H...
Page 247 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code COMPUTER IN1 BE EF 06 00 3E F4 01 00 B0 20 00 00 MONITOR OUT - BE EF 06 00 CE B5 01 00 B0 20 FF 00...
Page 248 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 31 CD 02 00 61 20 00 00 VOLUME - Increment BE EF 06 00 57 CD 04 00 61 20 00 00 VIDEO...
Page 249 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 BA DD 01 00 33 20 00 00 AUDIO1 BE EF 06 00 2A DC 01 00 33 20 01 00 AUDIO AUDIO2...
Page 250 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code POLSKI BE EF 06 00 97 D7 01 00 05 30 0E 00 TÜRKÇE BE EF 06 00 07 D6 01 00 05 30 0F 00 DANSK BE EF...
Page 251 RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code TEST PATTERN BE EF 06 00 43 D9 01 00 22 30 00 00 DOT-LINE1 BE EF 06 00 D3 D8 01 00...
Page 252 RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code COMPUTER IN1 BE EF 06 00 3A 33 01 00 00 36 00 00 COMPUTER IN2 BE EF 06 00 FA 31...
Page 253 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code COMPUTER IN1 BE EF 06 00 FA 38 01 00 20 36 00 00 COMPUTER IN2 BE EF 06 00 3A 3A 01 00 20 36 04 00 BE EF...
Page 254 PJLink command PJLink command Commands Control Description Parameter or Response 0 = Standby POWR Power Contorol 1 = Power On 0 = Standby POWR ? Power Status inquiry 1 = Power On 2 = Cool Down 11 = COMPUTER IN 1 12 = COMPUTER IN 2 21 = COMPONENT 22 = S-VIDEO...
Page 255 Responds with the name set in "PROJECTOR NAME ? Projector Name inquiry NAME" of "NETWORK" Manufucturer's Name INF1 ? HITACHI inquiry Your model name, "CP-X4021N", "CP-X5021N" INF2 ? Model Name inquiry or "CP-WX4021N". Responds with the factory information and so...
Page 256 Refer following web page for license agreements for such software modules and TUGUÊS other software. web page address: http://av.hitachi.com/projector/index.html Contact dealer in your region for inquiry regarding licensed software. Refer to license agreement of each software in following pages (...
Page 257 TUGUÊS Consultez la page Web suivante pour les accords de licence pour lesdits modules logiciels et d’autres logiciels. Adresse de la page Web: http://av.hitachi.com/projector/index.html Adressez-vous à votre revendeur pour toute question sur les logiciels sous SVEN licence. Consultez les accords de licence de chaque logiciel aux pages suivantes...
Page 258 TUGUÊS Informationen zu den Lizenzvereinbarungen für derartige Softwaremodule und sonstige Software nden Sie auf der folgenden Webseite. URL: http://av.hitachi.com/projector/index.html SVEN Wenden Sie sich bei Fragen zu Lizenzsoftware an Ihren Vertragshändler. Detaillierte Informationen die den Lizenzbedingungen finden Sie in den РУСС...
Page 259 TUGUÊS Consulte los acuerdos de licencia de dichos módulos de software y otro software en la siguiente página Web. Dirección de la página Web: http://av.hitachi.com/projector/index.html Si tiene alguna duda sobre el software otorgado bajo licencia, póngase en SVEN contacto con su distribuidor. Para conocer los detalles de las condiciones de licencia y otras cosas, consulte los acuerdos de licencia de cada software en РУСС...
Page 260 Consultare la seguente pagina web per gli accordi di licenza relativi a tali moduli TUGUÊS software e ad altri software. Indirizzo pagina web: http://av.hitachi.com/projector/index.html Rivolgersi al rivenditore per ulteriori informazioni riguardanti il software concesso in licenza. Consultare gli accordi di licenza di ciascun software alle seguenti...
Page 261 LANDS for hver programvare. Se den følgende websiden for lisensavtaler for slike programvaremoduler og TUGUÊS annen programvare. Webadresse: http://av.hitachi.com/projector/index.html Kontakt din forhandler for innspill angående lisensiert programvare. Se lisensavtalene for hver programvare i de følgende sidene ( SVEN 15 - og lisensavtalene for hver programvare på...
Page 262 Webpagina: http://av.hitachi.com/projector/index.html N e e m c o n t a c t o p m e t u w d e a l e r v o o r i n l i c h t i n g e n b e t r e f f e n d e s o f t w a r e w a a r o p e e n g e b r u i k s r e c h t i s g e v e s t i g d .
Page 263 Consulte a página de Internet seguinte para contratos de licença para tais TUGUÊS módulos de software e outro software. Endereço da página de Internet: http://av.hitachi.com/projector/index.html Em caso de dúvidas, contacte o seu revendedor relativamente ao software licenciado. Consulte os contratos de licença de cada software nas páginas...
Page 264 End User License Agreement for the Projector Software ENGLISH FRAN ÇAIS TSCH ESPA ÑOL ITALI NEDER LANDS 15 - TUGUÊS SVEN РУСС КИЙ License Agreement...
Page 265 End User License Agreement for the Projector Software ENGLISH FRAN ÇAIS TSCH ESPA ÑOL ITALI NEDER LANDS TUGUÊS 15 - SVEN РУСС КИЙ License Agreement...
Page 266 Inc. (USA.) eller licensavtal för varje programvara. Se följande webbsida för licensavtal för sådana programvarumoduler och andra TUGUÊS programvaror. Webbsida: http://av.hitachi.com/projector/index.html Kontakta din återförsäljare för frågor angående licensierad programvara. Se licensavtal för varje programvara på följande sidor ( ) och licensavtal för...
Page 267 на каждое программное обеспечение. Лицензионные соглашения для подобных модулей программного обеспечения и другого программного обеспечения приведены на следующей веб- странице. SVEN Адрес веб-страницы: http://av.hitachi.com/projector/index.html РУСС Информацию о лицензированном программном обеспечении можно получить КИЙ у дилера. Подробные данные по условиям лицензирования и другим вопросам...
Page 268 NEDER Seuraavalta verkkosivulta saat lisätietoja kyseisten ohjelmistomoduulien ja LANDS muiden ohjelmistojen lisenssisopimuksista. TUGUÊS Verkkosivun osoite: http://av.hitachi.com/projector/index.html Ota yhteys myyjään saadaksesi tietoa käyttöoikeuksin suojatusta ohjelmistosta. Katso kunkin ohjelmiston käyttöoikeussopimus seuraavilta sivuilta ( 15 - ja käyttöoikeussopimusten yksityiskohtaiset tiedot kunkin ohjelmiston verkkosivuilta. (Seuraavat käyttöoikeussopimukset ovat vain englanniksi, koska SVEN ne ovat kolmannen osapuolten sopimuksia.)
Page 269 Free Software Foundation, Inc. (U.S.) lub porozumień licencyjnych dla poszczególnych programów. TUGUÊS Umowy licencyjne dla takich modułów oprogramowania oraz innego oprogramowania można znaleźć na poniższej stronie internetowej. Adres strony internetowej: http://av.hitachi.com/projector/index.html SVEN Pytania dotyczące licencjowanego oprogramowania można kierować do swojego sprzedawcy. Szczegóły warunków licencji oraz podobne informacje РУСС...
Page 270 End User License Agreement for the Projector Software GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright © 1989, 1991 Free Software Foundation, Inc. ENGLISH 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. FRAN ÇAIS Preamble...
Page 271 End User License Agreement for the Projector Software other work under the scope of this License. cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a 3. You may copy and distribute the Program (or a work based on ENGLISH consequence you may not distribute the Program at all.
Page 272 End User License Agreement for the Projector Software 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE program `Gnomovision' (which makes passes at compilers) LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT written by James Hacker. ENGLISH HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY <signature of Ty Coon>, 1 April 1989 AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED Ty Coon, President of Vice...
Page 273 End User License Agreement for the Projector Software GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ENGLISH Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. FRAN [This is the rst released version of the Lesser GPL.
Page 274 End User License Agreement for the Projector Software means all the source code for all modules it contains, plus any Public License instead of this License to a given copy of the associated interface denition les, plus the scripts used to control Library.
Page 275 End User License Agreement for the Projector Software a) Accompany the work with the complete corresponding 9. You are not required to accept this License, since you have not machine-readable source code for the Library including signed it. However, nothing else grants you permission to modify ENGLISH whatever changes were used in the work (which must be or distribute the Library or its derivative works.
Page 276 End User License Agreement for the Projector Software software which is copyrighted by the Free Software Foundation, permitting redistribution under these terms (or, alternatively, under write to the Free Software Foundation; we sometimes make the terms of the ordinary General Public License). ENGLISH exceptions for this.
Page 277 Tel: +60 -3-8926-4168 Tel: 04 37 42 84 30 Fax: +60 -3-8926-3013 ► http://www.hitachiconsumer.com.my Email: france.consommateur@hitachi-eu.com Hitachi Europe GmbH Hitachi Home Electronics Asia, (S) Pte Ltd. Am Seestern 18 438A Alexandra Road #01-01/02/03 40547 Düsseldorf GERMANY Alexandra Technopark, 119967 SINGAPORE Tel: 211-5283-808...

This manual is also suitable for:

Cp-x5021n Cp-wx4021n

Hitachi CP-X4021N User's Manual And Operating Manual

Table of Contents

Introduction

Setting up

Remote Control

Power On/Off

Operating

Easy Menu

PICTURE Menu

IMAGE Menu

INPUT Menu

SETUP Menu

AUDIO Menu

SCREEN Menu

OPTION Menu

NETWORK Menu

SECURITY Menu

Presentation Tools

Connection to the Network/Network Presentation

1 Connection to the Network

2 Network Presentation

3 Web Control

4 My Image Function

5 Messeger Function

6 Network Bridge Function

7 Other Functions

8 Troubleshooting

9 Warranty and After-Sales Service

Projector Cp-X4021N/Cp-X5021N/ Cp-Wx4021N

Quick Links

Chapters

Troubleshooting

Related Manuals for Hitachi CP-X4021N

Summary of Contents for Hitachi CP-X4021N

This manual is also suitable for: