Hitachi CP-X467 Operating Manual page 60

MIU menu
MIU menu (continued)
Item
Selecting this item displays the MIU SETUP menu.
Use the ▲/▼ buttons to select an item, and the ► or
ENTER button on the remote control to perform the
item.
(Dynamic Host
Configuration
SETUP
(continued on next page)
60
Use the ▲/▼ buttons to turn DHCP on/off.
ON ó OFF
Select OFF when the network does
DHCP
not have DHCP enabled.
• When the "DHCP" setting changes to "ON", it takes a
little time to obtain IP address from DHCP server.
Protocol)
• Auto IP function will be assigned an IP address if the
projector could not obtain an IP address from server
even if DHCP is "ON".
Use the ▲/▼/◄/► buttons to
enter the IP ADDRESS. This
function can only be used when
DHCP is set to OFF.
IP
ADDRESS
• The IP ADDRESS is the number that identifies this
projector on the network. You cannot have two devices with
the same IP ADDRESS on the same network.
• The IP ADDRESS "0.0.0.0" is prohibited.
Use the ▲/▼/◄/► buttons to
enter the same SUBNET MASK
used by your PC. This function can
SUBNET
only be used when DHCP is set to
MASK
OFF.
• The SUBNET MASK "0.0.0.0" is prohibited.
Use the ▲/▼/◄/►
buttons to enter the DEFAULT
DEFAULT
GATEWAY (a node on a computer
network that serves as an access
GATEWAY
point to another network) address.
This function can only be used when DHCP is set to OFF.
Use the ▲/▼/◄/►
buttons to input the DNS
DNS
server address. The DNS
SERVER
server is a system to control
domain names and IP addresses on the Network.
Description