Hitachi CP-X467 Operating Manual page 25

Using the menu function (continued)
In the Advanced Menu
2.
Use the ▲/▼ cursor buttons to select a menu.
If you want to change it to the EASY MENU,
select EASY MENU.
Then press the ► cursor button, or ENTER
button to select an item. The lower layer menu
of the selected item will appear.
3.
Use the ▲/▼ cursor buttons to select an item
to operate.
Then press the ► cursor button, or ENTER
button to progress. The operation menu of the selected item will appear.
4.
Use the ▲/▼ cursor buttons to operate the item.
● Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
● When you want to reset the operation, press RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE, H
PHASE, VOLUME) cannot be reset.
● In the Advanced Menu, when you want to return to the previous display, press
the ◄ cursor button or ESC button on the remote control.
5.
Press MENU button on the remote control again to close the menu and
complete this operation. Even if you do not do anything, the dialog will
automatically disappear after about 10 seconds.
Operating
Advanced Menu
25