Hitachi CP-X467 Operating Manual page 64

MIU menu
MIU menu (continued)
Item
Selecting this item displays the MY IMAGE menu.
Insert the SD memory card or USB memory into the
projector before you use the MY IMAGE function
(11). The application software "PJTransfer" is
required to store image(s) into the projector.
Use the ▲/▼ buttons to select an item which is a still image by the MY
IMAGE (MY IMAGE (Still Image Transfer) Display of the User's
Manual - Network Guide) and the ► or ENTER button to display the
image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed
MY IMAGE
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ or ESC button on the remote control.
To erase the image displayed and its source file in the SD memory
card or USB memory
(1) Press the RESET button on the remote
(2) Press the ENTER button on the remote control or the INPUT button
(continued on next page)
64
control while displaying an image to display
the MY IMAGE - RESET menu.
on the projector to perform to erase.
To stop erasing, press the ESC button on the remote control or the ◄
button on the projector.
Description