Presenting Image Files From A Digital Camera - Epson PowerLite 755c User Manual

Display order
Lets you choose between displaying alphabetically by file
name or by image file date.
Effect
Lets you choose from various transitions between slides, such
as Dissolve or Wipe.
Mode switching
Lets you choose the mode to use when presenting slideshows,
movies, or images, or editing a scenario on the projector.
In
Guide mode
select an item and press
In
Quick mode
pressing
Enter
pressing
Enter
, press the
Quick mode
4. When you're done, highlight
are permanently saved with each folder—even if you turn off the
projector or remove the memory card.
Presenting Image Files From a Digital
Camera
This section explains how to project individual image files on your
digital camera using EasyMP CardPlayer and a USB cable connection.
Before you begin, make sure there is no memory card in the
projector's card slot. You cannot have the camera connected while a
memory card is inserted; neither the camera nor the card will function
with EasyMP CardPlayer.
Follow these steps:
1. Connect your digital camera (see page 46).
2. Turn on your digital camera.
3. Turn on the projector and the remote control, if they're not
already on.
, a drop-down menu appears whenever you
.
Enter
, selecting a scenario, movie, or image file and
starts the presentation; selecting a folder and
opens the folder. To access the menus in
key.
Esc
and press
OK
Presenting from a Memory Card, Digital Camera, or External Drive
. Your changes
Enter
note
Most digital cameras also
have the ability to play
internal slideshows.
Depending on the kind of
cable you have, you can
connect a camera with a
video or A/V out port to the
projector's or
Video
port and transmit
S-Video
your camera's slideshow
directly to the projector. You
must press the or
Video
button on the
S-Video
remote control to select the
correct signal source. See
pages 42 or 43 for details.
89