Presenting Image Files From A Digital Camera - Epson PowerLite 1705c User Manual

■
Screen switching time
Sets the display time for each image. Choose
to change slides manually.
■
Effect
Lets you choose from various transitions between slides, such
as Dissolve or Wipe.
4. When you're done, highlight
are permanently saved with each folder—even if you turn off the
projector or disconnect the drive or camera.
Presenting Image Files From a Digital
Camera
This section explains how to project individual image files on your
digital camera using EasyMP PC Free mode and a USB cable
connection.
Follow these steps:
1. Connect your digital camera (see page 44).
2. Turn on your digital camera.
3. Turn on the projector and the remote control, if they're not
already on.
4. Select EasyMP as the source by pressing the
the remote control. If your camera complies with the DCIM
standard, you'll see a
screen.
5. Use the pointer button on the remote control to position the
cursor on the folder and press
6. Select
Open Folder
opens, you see another folder with your manufacturer's name.
7. Position the cursor on the folder and press
8. Select
Open Folder
opens.
and press
OK
folder appear on the EasyMP PC Free
DCIM
.
Enter
in the drop-down menu. When the folder
. You see your image files when the folder
Presenting from a Digital Camera or External Drive
if you want
No
. Your changes
Enter
button on
EasyMP
.
Enter
note
Most digital cameras also
have the ability to play
internal slideshows.
Depending on the kind of
cable you have, you can
connect a camera with a
video or A/V out port to the
projector's or
Video
port and transmit
S-Video
your camera's slideshow
directly to the projector. You
must press the or
Video
button on the
S-Video
remote control to select the
correct signal source. See
pages 40 or 41 for details.
97