Rs (Register Set) - Epson S5U1C63000A User Manual

rs
(register set)
Function
This command modifies the register values.
Format
(1) >rs <register> <value> [<register> <value> [...<register> <value>]]
(2) >rs
PC = Old value : <value>
A = Old value : <value>
B = Old value : <value>
X = Old value : <value>
Y = Old value : <value>
FE = Old value : <value>
F I = Old value : <value>
FC = Old value : <value>
FZ = Old value : <value>
SP1 = Old value : <value>
SP2 = Old value : <value>
EXT = Old value : <value>
Q = Old value : <value>
>
<register>: Register name (PC, A, B, X, Y, F, SP1, SP2, EXT, Q)
<value>: Value to be set to the register; hexadecimal
Examples
Format (1)
>rs pc 110 f 0
Format (2)
>rs
PC= 116: 110
A= 0: f
B= 0:
X= 0: 100
Y= 0: 100
FE= 0:
FI= 0:
FC= 1: 0
FZ= 1: 0
SP1= aa: ff
SP2= aa: ff
EXT= 0:
Q= 0:
When a register is modified, the [Register] window is updated to show the contents you have input. If
you input "q " to stop entering in the middle, the contents input up to that time are updated.
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
... Sets PC to 0x0110 and resets all the flags.
EPSON
CHAPTER 8: DEBUGGER
(direct input mode)
(guidance mode)
175