Sfl (Save To Flash Memory) - Epson S5U1C63000A User Manual

sfl
(save to flash memory)
Function
This command writes the contents of the target memory in the ICE into the flash memory.
Writing to the flash memory allows the ICE to be operated in free-run mode. Furthermore, the next
debug session can be continued immediately from the current contents in the flash memory.
Format
(1) >sfl <content> [ ... <content>] [-p]
(2) >sfl
Protect flash memory 1. yes 2. no ...? <1 | 2>
Write program 1. yes 2. no ...? <1 | 2>
data
fog
sog
mla
Saving ...
>
<content>: Data type; p (program) / d (data) / f (fog) / s (sog) / m (mla)
-p: Protect option
Examples
Format (1)
>sfl p d f s m -p
Please wait few minutes
Save to flash memory ... done!
>
Format (2)
>sfl
Protect flash memory
Write program
data
fog
sog
mla
Please wait few minutes
Save to flash memory ... done!
>
If you enter only the [Enter] key in the middle of guidance, the guidance is terminated and only the
area you have selected up to that time is written into the flash memory.
Notes
• If the flash memory is write-protected, an error results and memory contents are not written to the
flash memory.
Error : flash ROM is protected
The write-protect can be removed by erasing the flash memory with the efl command.
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
1. yes 2. no ...? <1 | 2>
1. yes 2. no ...? <1 | 2>
1. yes 2. no ...? <1 | 2>
1. yes 2. no ...? <1 | 2>
1.yes 2.no ...? 1
1.yes 2.no ...? 1
1.yes 2.no ...? 1
1.yes 2.no ...? 1
1.yes 2.no ...? 1
1.yes 2.no ...? 1
EPSON
(direct input mode)
(guidance mode)
...Saves all contents and sets prorect.
... Protect is set.
... Write contents are selected.
CHAPTER 8: DEBUGGER
211