Output Files - Epson S5U1C63000A User Manual

Source file
File format: Text file
File name: <file name>.s
Description: This is the source file of the above object file. It is read when the debugger performs source
display.
Program file
File format: HEX file in Motorola-S format
File name: <file name>.hsa, <file name>.lsa
Description: This is a load image file of the program ROM, and is read into the debugger by the lo
command. The file ".hsa" corresponds to the 5 high-order bits of the program code and the
file ".lsa" corresponds to the 8 low-order bits of the program code. These files are generated
for the purpose of creating mask data from an object file in the IEEE-695 format by the Hex
convertor. Unlike files in the IEEE-695 format, these files cannot be used for source display
or symbolic debugging, but can be used to check the operation of final program data.
Data file for data ROM
File format: HEX file in Motorola-S format
File name: <file name>.csa
Description: This is a load image file of the data ROM, and is read into the debugger by the lo com-
mand. This file is generated for the purpose of creating mask data from an object file in the
IEEE-695 format by the Hex convertor. When an absolute object file in the IEEE-695 format
is loaded, it is not necessary to load this file.
Option data file
File format: HEX file in Motorola-S format
File name: <file name>.fsa, <file name>.ssa, <file name>.msa (Varies with the type of microcomputer)
Description: These data files are used to set up hardware options for each microcomputer model and is
read by the lo command. These files are generated by a development tool available for each
microcomputer model.
Command file
File format: Text file
File name: <file name>.cmd (An extension other than ".cmd" can also be used.)
Description: This file contains a description of debug commands to be executed successively. By writing
a series of frequently used commands in this file, the time and labor required for entering
commands from the keyboard can be saved. The command described in the file are read
and executed using the com or cmw command.

8.2.2 Output Files

Log file
File format: Text file
File name: <file name>.log (An extension other than ".log" can also be used.)
Description: This file contains the information of executed commands and execution results that are
output to a file. Output of this file can be controlled by the log command.
Record file
File format: Text file
File name: <file name>.cmd (An extension other than ".cmd" can also be used.)
Description: This file contains the information of executed commands that are output to a file. Output of
this file can be controlled by the rec command.
Trace file
File format: Text file
File name: <file name>.trc (An extension other than ".trc" can also be used.)
Description: This file contains the specified range of trace information. Output of this file can be con-
trolled by the tf command.
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
EPSON
CHAPTER 8: DEBUGGER
119