Table of Contents
Advertisement
EPROM Type
This option is not available for S1C63 Family microcomputers.
User's Name
Enter your company name. Up to 40 characters can be entered. You can use English letters, numbers,
symbols, and spaces. The content entered here is recorded in the USER'S NAME field of the function
option document file.
Comment
Enter a comment. Up to 50 characters can be entered in one line. You can enter up to 10 lines. You can
use English letters, numbers, symbols, and spaces. Use the [Enter] key to create a new line. All
comments should include the following information:
• Place of business, your department or section
• Address, telephone number, and facsimile number
• Other: Technical information, etc.
The content entered here is recorded in the COMMENT field of the function option document file.
When you have finished entering the above necessary items, click [OK]. The setup contents are saved,
and the dialog box is closed. The setup contents take effect immediately. If you click [Cancel], current
settings will not be changed and the dialog box is closed.
Notes: • File name specification is subject to the following limitations:
1. The number of characters that can be used to specify a file name including the path is 2,048.
2. The file name itself (not including the extension) can be up to 15 characters, and the exten-
sion up to three characters.
3. The file name cannot begin with a hyphen (-), nor can the following symbols be used as part
of directory names (folder names), file names, and extensions:
/ : , ;
? " < > |
• The symbols shown below cannot be used in the User's Name and Comment:
$ \ | `
(3) Selecting options
Select necessary options by clicking the corresponding check boxes in the option list. When you
change any selection item in the option list area, the display in the function option document area is
updated. Note that when you have loaded the device information definition file, the option list is
placed in its default selection state.
For details about option specifications, refer to the Technical Manual available for each type of
microcomputer.
(4) Creating files
After selecting options, select [Generate] from the [Tool] menu or click the [Generate] button to create
the files.
[Generate] button
The function option document file you specified from the [Setup] dialog box and the function option
HEX file (if specified) are created. When winfog has finished creating the files normally, it displays the
message "Making file(s) is completed" in the message area. If an error occurs, an error message is
displayed.
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
CHAPTER 9: FUNCTION OPTION GENERATOR
EPSON
245
Advertisement
Table of Contents
