CHAPTER 10: SEGMENT OPTION GENERATOR
10.3.4 Option Selection Buttons
The following buttons are available in the option setup area.
OUTPUT Option buttons
These buttons select SEG pin output modes. These buttons are enabled when you click a SPEC cell in
[SEGMENT DECODE TABLE].
Selects LCD segment output.
Selects DC-complementary output.
Selects DC-Pch open-drain output.
Selects DC-Nch open-drain output.
Selects segment/common shared output.
[Delete] button
Clears one selected segment assignment.
10.3.5 Operation Procedure
The following shows the basic operation procedure.
(1) Loading the device information definition file
First, select a device information definition file (s1c63xxx.ini) and load it.
Select [Device INI Select] from the [Tool] menu or click the [Device INI Select] button.
[Device INI Select] button
The dialog box shown below appears. Enter a file name including the path in the text box or select a
file by clicking the [Ref] button.
254
Click [OK], and the file is loaded. If the
specified file exists and there is no problem
with its contents, the set-up items in winsog
are initialized with the loaded device
information.
To stop loading the file, click [Cancel].
EPSON
(S1C63 FAMILY ASSEMBLER PACKAGE)
S5U1C63000A MANUAL