Debug Functions; Loading Program And Data Files - Epson S5U1C63000A User Manual

8.8 Debug Functions

This section outlines the debug features of the debugger, classified by function.
Refer to Section 8.9, "Command Reference" for details about each debug command.

8.8.1 Loading Program and Data Files

Loading files
The debugger can read a file in IEEE-695 format or Motorola-S format in the debugging process.
Table 8.8.1.1 lists the files that can be read by the debugger and the load commands.
File type Data type
IEEE-695 Program/data
Motorola-S Program (5 high-order bits)
Program (8 low-order bits)
Function option
Segment option
Melody data
Debugging a program with source display
To debug a program using the source display and symbols, the object file must be in IEEE-695 format
read into the debugger. If any other program file is read, only the unassemble display is produced.
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
Table 8.8.1.1 Files and load commands
Ext. Generation tool
.abs Linker
.hsa HEX convertor
.lsa HEX convertor
.fsa Function option generator
.ssa Segment option generator
.msa Melody assembler
EPSON
CHAPTER 8: DEBUGGER
Com. Menu
lf [File | Load File...]
lo [File | Load Option...]
(Ext. = Extension, Com. = Command)
Button
141