Server Monitoring Tool [Serverview] - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 6 High Reliability Tools
6.1 Server Monitoring Tool
[ServerView]
ServerView constantly monitors the status of the servers' hardware in the network
and provides a console with which the administrator can check the status of all the
servers at a glance. In addition, if an error occurs, the administrator will be notified in
real-time to take immediate action.
■ Installing ServerView
●
When Installed Using ServerStart
If the OS is implemented and setup using ServerStart, ServerView will be installed at once with the OS
and other high reliability tools.
●
When Installed Manually
Perform installation referring to "Chapter 2 Installing" in "ServerView User's Guide".
●
For Linux
ServerView cannot be installed using ServerStart. To install ServerView into a Linux system, refer to
"ServerView User's Guide".
Be sure to install SNMP service before installing ServerView.
Systems with Windows Server 2003 Service Pack 1 may display the following popup message at the
next startup after ServerView installation or uninstallation.This is not a problem. Click [Close message]
to close the message.
Windows has terminated the following program(s) to protect
your computer.
Name:
■ Setting Required after Installation
Perform necessary operations after ServerView installation referring to "2.4 Checking after Installation"
in "ServerView User's Guide".
■ Boot Monitoring Setting
We recommend enabling the "Boot Monitoring" function after ServerView is installed. For setting
procedures and explanation on the function, refer to the [Restart Settings] Tab of "3.2.4 Serious Error
Handling (ASR)" in "ServerView User's Guide".
160
SNMP Service