Where To Install Internal Hard Disk Units; Installable Internal Hard Disk Units - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 7 Installing Internal Options

7.7.1 Where to Install Internal Hard Disk Units

Install internal hard disk units in 3.5-inch storage bays in the front of the server.
■ Installation Order
The numbers and SCSI IDs of the 3.5-inch storage bays are as follows.
[Front]
PSU
(Option)
Install the internal hard disk unit in bay 1 first, then bay 2.
■ SCSI-ID Setting
SCSI-ID setting is not required for the 3.5-inch storage bay.
These 3.5-inch storage bays use hot plugs. A Single Connector Attachment2 (SCA2) connector is used
as an interface with an internal hard disk unit. Integrated power and signal cable eliminated the need for
troublesome cable connection work.

7.7.2 Installable Internal Hard Disk Units

■ Installable Internal Hard Disk Units
The following internal hard disk units can be installed on this server.
Product name
HDD U320 15K 73GB hot plug 1"
HDD U320 10K 147GB hot plug 1"
HDD U320 10K 300GB hot plug 1"
HDD U320 15K 73GB hot plug 1"
■ Contents of the Optional Internal Hard Disk Unit Package
Before installing the internal hard disk unit, refer to "Appendix B.4 Internal Hard Disk Unit
Specifications" ( pg.294) to check the contents of the optional package.
192
CD-ROM(Option)
FDD
Bay1( ID=0)
Bay2( ID=1)
table: List of Installable Internal Hard Disk Units
Model
PG-HDH71K
PG-HDH41K
PG-HDK31K
PG-HDH75K
Overview
73.4GB, 10,000rpm, Ultra320 SCSI
1 inch, supports hot plugs
146.8GB, 10,000rpm, Ultra320 SCSI
1 inch, supports hot plugs
300GB, 10,000rpm, Ultra320SCSI
1 inch, supports hot plugs
73.4GB, 15,000rpm, Ultra320 SCSI
1 inch, supports hot plugs