Fujitsu PRIMERGY RX200 S2 User Manual page 56

Chapter 3 OS Installation Using ServerStart
When the process is completed, the [Create a ServerStart Floppy Disk] window appears.
4
Click [Build a ServerStart Floppy Disk].
Creation of a ServerStart floppy disk starts.When the creation is completed, the "Floppy disk has
been created." message appears.
5
Click [OK].
"Please Select your keyboard" window appears.
6
Select your keyboard language from the dropdown list and click [OK].
The subsequent start procedure may take several minutes.
The [Welcome to ServerStart] window appears.
7
Click [Click here to prepare and/or initiate an operating system installation].
The [Select the operating system to be installed] window appears.
Click [Special Hints on Operating System Installation] and read the contents. Important
information such as limitations on disk configuration is described.
8
Click [MS Windows Operating Systems].
The [Microsoft Windows Operating System Installation] window appears.
9
Click the OS to install.
56