EPOX EP-6VBA User Manual page 52

A pentium ii or pentium iii slot1 processor based agp mainboar mainboard (100/66mhz) d (100/66mhz) supports pc-133 sdram module
Table of Contents

Advertisement

BIOS
To change the password, choose the "SUPERVISOR PASSWORD or USER
PASSWORD" option from the CMOS SETUP UTILITY menu and press
[Enter].
NOTE: Either "Setup" or "System" must be selected in the "Security Option"
of the BIOS FEATURES SETUP menu.
1. If CMOS is corrupted or the option was not used, a default password
stored in the ROM will be used. The screen will display the following
message:
Enter Password:
Press the [Enter] key to continue after the proper password is given.
2. If the CMOS is corrupted or the option was used earlier and the user
wishes to change the default password, the SETUP UTILITY will display
a message and ask for a confirmation.
Confirm Password:
3. After pressing the [Enter] key (ROM password if the option was not
used) or current password (user-defined password), the user can change
the password and store new one in CMOS RAM. A maximum of 8
characters can be entered.
Page 4-24
EP-6VBA

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EP-6VBA and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF