Table of Contents
Advertisement
Chapter 5 Setting
Whether to validate or invalidate the boring mode and to shift data in case of boring
can be set.
Validation/Invalidation of Boring Mode
1.
2.
3.
4.
5.
102
Boring
This setting is available only for sewing data which has been created for boring.
The machine itself cannot check if the sewing data is for boring or not. Therefore,
make sure to check the data before starting sewing.
Mount the following optional accessories on the machine before starting sewing.
• Boring knife
• Needle plate for boring, Finger guard
If editing including enlargement, reduction or rotation is done using sewing data
created for boring, the correct sewing may not be available.
This function is previously set to :
• Boring mode valid/invalid
• Data shift valid/invalid
Press
twice.
Select
by pressing
Press
.
Select
by pressing
Validate or invalidate the boring mode by pressing
When the boring mode is valid
When the boring mode is invalid
BES-916AC • BES-1216AC
:
invalid
:
invalid
.
.
.
Advertisement
Table of Contents
