E serieselectronic direct drive lockstitch bar tacker & button sewer (60 pages)
Summary of Contents for Brother BE-901
Page 1
Technical Reference Title: Replacing Power Supply Board Date: February 25, 2009 Models: BE-901, BE-901-PC, BE-1201, BE-1201-PC, BES-916, BES-1216 1. Make sure machine is OFF and Unplugged. 2. Remove cover assy. (Six screws removed “A”, Three loosened “B”) 3. Identifying Main Bord. (Also: Power Supply, and Head Board) Head Board Main Board Head Board...
Page 2
4. Unplugging all wire connector harnesses. P1, P2, P3, P4, P5, and P6. 5. Unplug all connectores to remove board. However, keep in mind that connectors only go in one spot and can not be confused. 6. Board is held inplace by plastic clip locks. In order to unlock you will need to squeese locks and lightly pull-up on board to release.
Page 3
7. Once you remove old board you are ready to install the new one. Things to look for before installing. A. Fuses: If the new board is missing fuses remove from old board to install on new board. 8. Installing board, please follow reverse instructions of removal. 9.