Table of Contents
Advertisement
Chapter 1 Preparation of Embroidery Machine
Attaching a sash frame set (optional)
q
u
Projection
y
q
u
34
e
r
t
w
Projection
y
e
r
t
i
BES-916AC • BES-1216AC
1. Turn off the machine power switch.
2. Pull X carriage q fully toward you. Loosen
two screws e. Remove flat hoop frame
(assembly) w with spring washers r and
plane washers t from X carriage q.
Note) Save the two screws, spring washers, and
plane washers removed in the above step.
They will be used later.
3. Fit spacer u to the projection of frame base
plate assembly y mounted on X carriage
q.
4. After attaching spacer u, attach sash
frame i in the same manner and fix them
using screws e, spring washers r, and
plane washers t removed in step w.
Note) When attaching the sash frame, check that the
side with felt affixed to the back faces the
front.
Advertisement
Table of Contents
