Table of Contents
Advertisement
Chapter 7 Maintenance
2. Oiling
To extend the machine's service life, supply oil to the following places at regular intervals.
The models BES-916AC and BES-1216AC adopt centralized wick lubrication (including rotary
hooks). Before daily operation, supply oil as needed while checking the oil level through the
oil window.
(Note) • When oiling, be sure to supply Brother's machine oil (Nisseki Sewing Lube #10 or the equivalent) using
the dropper.
• Excessive oiling may cause the material to be stained.
• Lubricate the rotary hook.
2-1 Head
When the machine has been unpacked or has not been used over a prolonged period
BES-916AC
126
Supply 7 or 8 drops of oil to the points
indicated by the arrows in the figure before
starting operation.
Supply oil to the top and the bottom of each
needle bar (18 points) daily as shown in the
figure.
BES-916AC • BES-1216AC
Advertisement
Table of Contents
