174
Self-help
Tail lights
1. Disenga ge c ov er by pressing retaining
lugs and remove.
2. Deta ch plug connector from bulb
mounting .
3. Grip the bulb housing from the outside,
slacken the two knurled nuts using the
wheel bolt key 3 and unscrew b y hand.
4. Deta ch bulb housing.
5. Press retaining lugs on bulb m ounting
tog ether and remove bulb mounting, as
shown in illustration.
Lights from top to bottom:
Reversing lig ht/brake light
Turn signal light
Reversing lig ht
1 )
Fog ta il light
6. Remov e bulb from socket.
7. Insert new b ulb, without touching the
glass. Engage bulb mounting in bulb
housing . Insert bulb housing into vehicle
body. Screw fixing nuts onto setscrews
by hand a nd tighten. Eng age plug
connector. Place cover in p osition and
close.
1)
Co untry-specific version: Fog ta il light on one
side on ly.