Vauxhall Combo Owner's Manual page 160

4. Before attac hing the jack 3 , set it to the
required height by turning the lug by
hand. Fit the jack arm at the front – or
rear – in such a way that the jack cla w
(arrow in figure) goes around the v ertical
ridg e and engages in the rec ess in the
ridg e. Ensure that the claw is prop erly
positioned.
The edge of the jac k base must b e
planted firmly and vertically in line with
the contact point.
Raise vehicle by turning crank handle.
If this is not the case, carefully lower the
vehicle imm ediately and reposition the
jack.
Self-help
5. Unscrew the wheel bolts and w ipe clean
with a cloth. Lightly grease the wheel
bolt taper. Mak e sure that the bolt
threads are not greased . Place the
wheel bolts where they will not b ecome
dirty.
On some versions, the wheel trim is
rem ov ed together with the wheel bolts.
The retaining ring s 3 at the wheel b olts
must not be removed.
6. Change the wheel. For information on
the spare wheel – see pa ge 149; for
informa tion on the temporary sp are
wheel – see p ages 137, 150, 205.
155