Vauxhall Combo Owner's Manual page 163

158 Self-help
4. Screw the compressor air hose to the
connection on the sealant bottle.
5. Fit the sealant bottle in the retainer on
the compressor.
Set the compressor near the ty re in such
a way tha t the sealant b ottle is up rig ht.
6. Remove the v alve cap from the defective
ty re.
7. Sc rew the filler hose to the ty re v alve.
8. The switch on the compressor m ust be
set to §.
9. Plug the c om pressor connec tor into the
accessory socket or the ciga rette lig hter
socket. Accessory sock et – see page 71.
10. Switch on ignition.
11. Set the rocker switch on the com pressor
to I. The tyre is filled with sea lant.
12. While the sealant bottle drains (a pprox.
30 seconds) the pressure ind icator on
the com pressor briefly points to 6 b ar
(87 psi). Pressure then sinks again.
13. All of the sea la nt is pump ed into the
tyre. Afterwards, the tyre is filled with
air.
14. The presc rib ed ty re pressure (see
page 205, 206) should be reached
within 10 minutes. S witch off the
compressor when the correct pressure is
obtained.