Hyper Terminal Setting Method - JVC LX-D1010G - Lcd Projector Service Manual

5. HYPER TERMINAL SETTING METHOD

This projector uses a communication program of the
® ®
Microsoft Windows 95 Operating System to control the
projector, adjust the circuits and to correct the time that the
light source lamp is used.
®
*" Windows 95" indication means that can be operated on
either Windows ® 95 or Windows
(1) Equipment requirements
・ A personal computer with the Microsoft
Operating System installed.
(2) Startup
①
®
Start Windows 95.
②
Double click on the Accessories folder.
③
Double click on the Hyper Terminal folder.
④
Double click on the Hypertrm icon to open the Hyper
Terminal window.
⑤
When the New Connection dialogue box opens, input
an appropriate name and select an icon, then click the
OK button.
® 98.
® Windows ® 95
Double click on the Hypertrm icon.
⑥
When the Phone Number dialogue box opens, set the
connection using the port where the RS-232C cable is
connected and then click on the OK button.
Set the port to be used.
⑦
Set the port in the COM* Properties dialogue box, then
click on the OK button.
Item
Bits per second
Data bits
Parity
Stop bits
Flow control
LX-D1010G
Setting
9600
8
None
1
None
(PA012) 5-1